Question about Pioneer Audio Players & Recorders
Unfortunatelly your receiver has failed. The front panel is telling you one of the power modules is probably bad. Not an DIY type of repair. These parts are near $40.00, plus cost of replacing.
Look at options to replace your trusted receiver with a new one.
Posted on Aug 02, 2009
Have you checked within the set, the fuse and if the standby circuit is working. thre could be a failure of this sub votage which is required for the switch on of the main power. If you do not have any standby indication you must check this section, however if you arre getting the standby you would have a failed output or a shorting that is triggering the error amp to swtich off. If you are familiar with the circuits you can check but I would suggest that since you will need more experience to look into the main board for tracing the fault. In such case check for the service centre nearest to the place you are in using a google search for Pioneer - Audio systems- sevice. Helpful I hope. Good day.
Posted on Jul 06, 2010
Tips for a great answer:
Nov 26, 2012 | Pioneer BDP-LX70 Installed
Jan 26, 2012 | Pioneer VSX-D514 Receiver
Mar 29, 2011 | Pioneer VSX-455 Receiver
Apr 26, 2010 | Pioneer VSX-518-K Receiver
Feb 11, 2010 | Pioneer VSX-27TX Receiver
Aug 22, 2009 | Pioneer VSX-92TXH Receiver
Jun 12, 2009 | Pioneer VSX-92TXH Receiver
Feb 10, 2009 | Pioneer VSX-305 Receiver
126 people viewed this question
Usually answered in minutes!