Question about Projection Televisions

1 Answer

I have a Pioneer PDP-5070HD. A cable box and xbox 360 are the only components connected to it. Recently the picture displays distorted red and green static, snow. I've done all I can to troubleshoot the problem with my limited knowledge. Please help me figure out the cause and my options. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 206 Answers

A few years back when we did pioneer Warranty work, I sent them a roll of solder because it was obvious they were out at the factory..... Many problems with Pioneers can be because of cold or intermittent solder connections. so the first thing a tech should do is simply re-solder all the boards. Sounds like you have a intermittent connection in the convergence circuit this would cause the red, green and blue to appear to separate

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get your xbox 360 to play, on a 65'' mitubishi projection tv,its connected but nothing comes on screen when i put a movie in just a blank screen and no sound,if i'm on a channel,the channel...


Hello

The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)

- HDMI

So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Nov 03, 2013 | Mitsubishi WD-73734 73" Television

3 Answers

Pioneer pdp-ro3u pops up E01 then shuts off


reset the device by unpluging the device for somr minutes and then again replug and see if it works.

thanks.

Oct 28, 2008 | Projection Televisions

1 Answer

Red-white-yellow inputs don't work


what model of computer do you have, what video outputs do you have on your computer, if you have an s-video out on your computer, I would use that with the tv

Mar 02, 2013 | Mitsubishi WS-48311 48" Rear Projection...

1 Answer

How do i hook my XBOX-360 up to this tv and get 1080i resolution? Thanks, Mike


You should be able to get 1080i with the Input/DVI port or the component video in ports of the TV. I believe the easiest option will be to set the XBox A/V switch to HDTV and use a component video cable (red, green, blue) from the XBox component out to the TV Component In. (with the audio out going to your TV or speaker system). Turn on the X-box and the My Xbox > System Settings. Then Console Settings > Display and chose the 1080i.

Set the TV Net Command (remote) and the Device settings for the input jack in use (component 1/2). Adjust the A/V menu for the Display before playing long.

Wen you change inputs, you will see a status screen for the settings for the TV input.

I hope this helps.

Cindy Wells

Sep 14, 2010 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

RCA 56" projection TV screen too large


What type of connection are you using on the Cable box and X-box?I would Recommend to use the Component(Red,Green,Blue+Red/White-Audio)Plug that several manufacturers make for the X-box360.If your cable box does not have those connectors,you will need to upgrade to a box that does and put settings to 1080i on both of them.Your television has 2 sets of components on back(synchroscan) and it will auto-detect the settings of the inputs and should work fine after that.

Jun 05, 2009 | RCA HD56W66 56" HDTV

1 Answer

Toshiba 57H82 Blurry Pic on HD inputs except Xbox 360


Probably your G-Hyper board. You will need expert servicer and should cost about 3-400.00
Craig www.classtorations.com

Jun 08, 2008 | Toshiba 57H82 57" Rear Projection...

2 Answers

No Picture from Component Input #1 or #2 but do have audio via Surrond Sound


Simplest thing would be that your component cables are not HU'd correctly. Having them reversed would do this.


Mr Bob

Feb 10, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Emerson LCD HDTV 19 inch won't connect to Xbox 360


Im not an expert on the 360s, but I believe there is a switch or option on them to play them in HD feed. They must be set to play HD as far as I understand.

Dec 26, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...