Question about Weber Gas Go-Anywhere Grill

2 Answers

Low flame On my Weber gas Go-Anywhere grill the propane seems to be coming out very slowly. The flame is very small, even when turned on high, and only on the end opposite the propane tank and regulator. Should I replace the regulator, the tube, both, or get a new grill? Thanks

Posted by on

  • 1 more comment 
  • tomasbj May 05, 2009

    I removed the sticker on the knob and screwed on the adjustment screw. Now I got a bigger flame, but strangely enough not in the full length of the tube. The first 10-20 cm have almost no flames emerging.

  • Anonymous Mar 22, 2014

    Even after turning down gas at BBQ, the temperature still climbs over 400. It doesnt seem to regulate the temperature to stay at a constant temp.

  • Anonymous Mar 25, 2014

    The original propane tank cannot be filled anymore since it just expired. When I hook any other tank to the grill the regulator does not work properly. I only get a small flame. Have replaced the regulator and I have the same problem.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 254 Answers

This problem most likely is with your regulator. if you decide to replace it please make sure you get the right size replacement. Some salespeople dont know the difference there are four common sizes from class 1 to class 4. If you take the old one with you make sure you match the numbers up with a new one.

Hope this helps You
please rate me.

Posted on Jul 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Adjust the screw hidden under a sticker on the adjustment knob. That will increase the flow.

Posted on May 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Poor flame after changing tank on gas grille


Turn off propane. Disconnect propane tank from barbecue. Open burner valves for about 20 seconds. Close valves. Reattach propane tank. Slowly open propane tank valve. Turn on burner and ignite

Jul 05, 2014 | Weber Genesis E-310 Gas Grill

1 Answer

Why is my flame low and the others don't light


Turn off propane. Disconnect propane tank from barbecue. Open burner valves for about 20 seconds. Close valves. Reattach propane tank. Slowly open propane tank valve. Turn on burner and ignite

Jun 24, 2014 | Weber Spirit SP-310 Propane Grill

1 Answer

I have a Weber gas grill, and I just replaced the propane tank, yet when I ignite it on the Start/High setting, very little flame is produced. This is the first time in 5 years or so that I've...


Don't worry, you'll be grilling in no time, if you follow these instructions:

1. Turn the gas tank valve OFF.

2. Disconnect the grill's hose from the propane tank and wait 5 minutes.

3. Reconnect the hose to the tank and open the tank's gas valve VERY, VERY SLOWLY (Slow Motion, slow).

Once the valve is fully open light one burner and turn it to HIGH. Has the flame height returned to normal? If so, light the remaining burner and turn it to HIGH. Do both flame heights look normal?
If so, you solve the problem! Remember to always turn the tank valve ON Very, Very Slowly.

Hope this helped you. Please let me know and Happy Grilling!!

Jun 16, 2011 | Weber Baby Q Grill

1 Answer

When we light the grill the burners only have a low flame. We can't turn it up to a high enough flame.


Hopefully this will fix you up. Follow exactly.
  1. Turn off the gas at the propane tank
  2. Disconnect the gas line from the tank
  3. Open the grill lid
  4. Turn all control valves to high
  5. Wait for about a minute
  6. Turn all control valves to off
  7. Reconnect the gas line to the tank
  8. SLOWLY turn on the gas at the tank
  9. Light the grill normally
  10. Your grill should now heat normally

Nov 06, 2010 | Weber Genesis Silver B Grill

1 Answer

My weber genesis silver starts up, but doesn't get hot enough to cook the food. Seems like not enough flame out of either front or back burners. I tried Outting in a full propane tank, but that didn't...


Try these steps in order.
  1. Turn off the gas at the propane tank
  2. Disconnect the gas line from the tank
  3. Open the grill lid
  4. Turn all control valves to high
  5. Wait for about a minute
  6. Turn all control valves to off
  7. Reconnect the gas line to the tank
  8. SLOWLY turn on the gas at the tank
  9. Light the grill normally
  10. Your grill should now heat normally

Sep 06, 2010 | Weber Genesis Silver B Grill

1 Answer

My Weber Q grill worked great for 5 years but now it won't light on one corner and I can't get a high flame on any part of the burner. Even on "high" the flames are small & blue and the heat level is...


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

You problem could be or probably is with the regulator...not enough gas pressure...

Propane, LP, or Natural Gas Regulator Problems


heatman101

Aug 26, 2010 | Weber Q Grill

1 Answer

Gas not coming out enough; flame not catching on to other burners


Problem: Low flames on grill, tank is full.

Cause: These newer tanks have a device inside that limits the flow of gas to prevent leaking or accidental discharge of gas from the cylinder. The leak detector mechanism inside the tank shuts off the gas whenever the valve is opened rapidly.

Solution:
Close the tank valve and remove the tank. Check the gas line for ANY object that could cause blockage. Open all valves on the grill to eliminate any pressure whatsoever. Close all valves and reattach tank. SLOWLY open the tank not over 2 turns. Check for leaks. I just open my tank a tiny bit but that is just me.

This late model gas grill service manual has more details on page 13.

Apr 28, 2010 | Weber Genesis Silver A Grill

2 Answers

The flame coming out of the burner bars is small


May likely be low on propane or propane tank gate valve not opened far enough. Otherwise sounds like faulty regulator.

Jan 16, 2010 | Weber Genesis Silver A Grill

2 Answers

Cannot get good flame on the burner of my baby weber grill. I've tried cleaning it checked hose, tank, regulator, seems to have good flow, but low flame only, even when set in high????????


I had this problem with a brand new grill so it wasn't grease in the hose. Due to the new propane regulators you have to turn the propane tank on for at least a minute before turning the grill to light. Let the tank sit in the light position for five seconds and then you light the grill. This will keep air from getting into the intake hose and will keep your gas flame roaring high.

I was only able to get the grill up to 250 degrees before I found this fix posted on the Weber site. It is listed as the number one solution in the FAQ section.

May 18, 2009 | Weber Baby Q Grill

2 Answers

My weber Baby Q grill has a low flame.


Agree with rjmbridge. I called the Weber support people and was told that there is a built in safety feature on the regulator that will cause the flame to burn at a low setting if the gas within the extension tube to the large tank and regulator is not allowed enough time to equalize. They suggested turning on the gas from the tank very slowly, allow about 2 minutes with the temperature control knob turned off, then turn the temp knob on and light. This worked for me.

May 27, 2008 | Weber Baby Q Grill

Not finding what you are looking for?
Weber Gas Go-Anywhere Grill Logo

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weber Grilling Experts

paulcarew

Level 3 Expert

2046 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Weber Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...