Question about Mitsubishi WS-55411 55" Rear Projection Television

1 Answer

TV not turning on after left on

Hi,
I have a WS-55411 model mitsubishi. I accidentally left the TV on for about 6 hours and when i came back there was three different colors on the TV. I turned it off and it wouldnt turn back on. I tried the input and menu thing, didnt work. Everytime i tried turning it on the green light would go on, then go off about 2 seconds. Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

Ok 6 hours is not long but i would deffintly say u have a power issue now with the box inside over heated and burnt out will have to be prfessionaly replaced

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I CAN GET PROPER COLOR ON MY WS-55411 MODEL


Try to describe better, is picture 3d looking or what is your problem?

Make a comment here OR IF YOU RE-POST THE QUESTION MARK IT "attention SD TECH" AND I will assist you.

I know the model indicated very well.

SD TECH

Sep 06, 2010 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Hi I need a replacement bulb for my WS-55411 Mitsubishi. Can you help me find the right bulb and it's part number? The screen blacked out and sound still works so I assume I need a new bulb. When I shop...


Your model doesnt have a bulb since its a rear projection TV . It has three picture tubes, However loss of video with audio still working is usually caused by a vertical output failure.

Jul 28, 2010 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

WS-55411 What seven capacitors need replacing? 2-3 code Problem


U check the power supply board,check all cap,and replaced it?Ur tv make buzzing noise when u turn on power?Ur flyback is dead.

Mar 17, 2010 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Mitsubishi 55411 projection tv has red band across bottom


go into the customer menu and select convergence with the original remote; if either the red or blue will not move in some direction, you have a bad convergence IC(the WS-55411 uses two STK-392-110 CONVERGENCE IC chips)

Aug 12, 2009 | Projection Televisions

1 Answer

Mitsubishi WS-55411 55 in. Rear Projection Television


2 possibilities. Either your convergence IC's are going bad, or you need to remove the front panel of TV where the speaker grill is and you will find a small box with 6 control knobs on it. Mark each knob so you can set it back to its original position if you forget, the set might turn off if you adjust too high on either color, if so, set knob back in original position and turn tv back on and try again.The if it works reallign your convergence and that should do it.

Jan 28, 2009 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Code 22, will not power up.


i found you a manual :)

http://www.mitsubishi-tv.com/support.html

from here select
CRT televisions, year:2003, then your model, and click pdf :)

Nov 19, 2008 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

4 pin or 6 pin


It has neither. It is not firewire capable.

Jul 17, 2008 | Mitsubishi WS-55411 55" Rear Projection...

2 Answers

Mitsubishi turns on for 3 seconds then shuts off..after power surge


try holding in the menu and input buttons together on the front panel for about 8 seconds to see if the self diagnosis feature will blink a two digt code then let me know what happens

Jun 05, 2008 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Mitsubishi WS-55411 55 in. No Power up


Error code 12 means normal operation. On these models we have found that a switch is bad on the control panel not allowing the set to turn on. Disconnect the control panel. You will be able to use the remote on set. To find the plugs for the control panel: Remove the speaker grill and front panel, then follow the wire to the connection. You can use an ohm meter to find the bad switch.

Jul 04, 2007 | Mitsubishi WS-55411 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55411 55" Rear Projection Television Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...