Question about Pioneer AirWave XM2Go Satellite Radio Receiver with Home and Car Kit

1 Answer

How to unlock radio

Radio won't turn off
unable to change stations

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Center button needed to be held for 10 sec.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My radio just recently goes up to 119 and several of the channels i listen too come up as updating....and won't play.


Give XM a call, since they merged the channel lineup has changed. Have them push a new activation signal to the unit, which should unlock the rest of the channels. However, the roady XT isn't exactly known for its reliability, so the receiver itself might be dead.

Sep 12, 2011 | Delphi Roady XT XM Radio Receiver

1 Answer

Radio stopped working. Screen would go back and forth from dark to light blank. Unable to turn on or off. Had to remove battery from radio to stop the alternating sequence. Reinstalling battery and...


Either Battery is dead, not charged, or needs to be replaced. Try using another charger overnight and see if takes care of the problem. If not replace the battery. If you have a volt meter you can check the voltage on the battery and on the charger. Expected output voltage is marked on the battery and the charger. You can pick up a cheat volt meter at your local auto parts or hardware store and will help you diagnose your problems.

Nov 23, 2010 | Delphi MyFi Satellite Radio Receiver

1 Answer

My skyfi 3 I have in my car and home. It has locked up on a station and I can not turn it off or change stations. Whats the problem?


First: push VOL UP and POWER and hold both at the same time to RESET the unit. Then use the MiniUSB cable to load the latest firmware from the Delphi/XM radio website. If you still have an issue after the firmware update, then call Delphi directly for assistance.

Aug 29, 2010 | Delphi SKYFi3 Satellite Radio Receiver

1 Answer

FM Transmitter does not connect to car radio, have FX signal and Line out works.


Car cradle works "wirelessly" with Car Radio (inherent design of unit). Place Unit in Cradle; connect Cradle to Auto Power Source, and SkyFi3 should power on. Press Menu to Get FM Radio station channels; select a lower station Channel Frequency i.e. 88.3 or any vacant channel number and the signal should transfer to your Radio speakers automatically. You can change Station frequencies as often as you need to do so--for example if traveling through different broadcast areas, some channels frequencies are clearer than others. Good luck.

Jul 19, 2010 | Delphi SKYFi3 XM Radio Receiver

1 Answer

Roady XT XM Radio Receiver: how do I change the radio station i want my xm to ...


First of all find a clear fm stn. on your car radio.Go to xm radio and push menu until fm freq. shows up.Push sel and use up or down arrows until the freq. matches that on car radio. push select again to set it.

May 07, 2010 | Delphi Roady XT XM Radio Receiver

2 Answers

Skifi xm


click on the display button until it shows the channel name

Aug 19, 2008 | Delphi SKYFi3 XM Radio Receiver

2 Answers

Stations dropped


Go to refresh.xmradio.com and insert your radio ID and click submit, it will send a refreshed activation signal to your radio and you should have your channels back within about 15-20 minutes

Jul 15, 2008 | Delphi Roady XT XM Radio Receiver

1 Answer

Roady xt


i figured it out with help from a delphi service rep.! you need to go into the menu and reset to factory default.this will erase everything you have changed from the factory settings,but once done you can reprogram your settings and they will stay. step 1-enter menu step 2-reset factory default settings step 3-reprogram your preset stations,FM freq. colors etc. step 4-use power button on the roady to turn it off.once the roady shuts down turn it back on with the power button. step 4-now you should be able to turn the key off without erasing your presets.

Apr 25, 2008 | Delphi Roady XT XM Radio Receiver

1 Answer

Vector Stormtracker Elite


Click on the mute button while WEATHER is selected on the dial. This should MUTE audio and ALERT will appear on LED. Then you will only hear ALERTS.

Mar 08, 2008 | Home Satellite Radios

Not finding what you are looking for?
Pioneer AirWave XM2Go Satellite Radio Receiver with Home and Car Kit Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Home Satellite Radios Experts

John
John

Level 2 Expert

473 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Edward Ngugi
Edward Ngugi

Level 2 Expert

70 Answers

Are you a Pioneer Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...