Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

1 Answer

Wont turn on

I just moved and didn't trust the movers with the tv so gently carried in my own car. when i got to my destination would not turn on. checked all plugs and conections. any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Hello vkparker,

You may have dislodged one of the boards while moving the set. I would suggest that you, makes sure that all of the boards are attached properly check all connections, make sure inter-board connectors are pushed down and secure. In addition make sure that you don't have any cold solder joints (which are a common problem with TVs these days), this would require you to touch up (resolder) those connections (if you can not do this have a electronics technician do this for you). After doing all of what I have suggested, if the problem still exist, I would suggest that you have a qualified TV technician examine the TV for what is wrong, I would suspect that the problem is in the power supply board.

I hope this helps,

Thank you,


Posted on Jul 18, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

House movers

need to look up a company and check their references and if they are able to get proper permits for your state and the other [s] at final destination

Jul 06, 2016 | Miscellaneous

1 Answer

Move Office

Good protection of computer in a garbage bag then place in packing boxes surrounded by with poly stryene foam cheezels or shredded paper. also do this for any thing fragile !

label side of box with room box has to go into as well as destination address, name ,and room on top of each box. As movers place boxes on top of each other and move three boxes on trolleys . you can end up with boxes placed in wrong rooms if only relying on top of box labels.

Move most vital items last into the truck as they will be first out of the truck at destination.

Jul 05, 2016 | Computers & Internet

1 Answer

Why Should You Hire the Professional Movers and Packers for Relocation?

professional movers and packers belong to an association that accredits them to do the job properly
that gives you a place to redress any issues that the company disputes
they also carry an insurance against damage and loss
they know their job
if you move a full house it is packed in the one container or van and that is not disturbed until it arrives at your destination at a time to suit you
non accredited movers load your gear on any truck going your way and any left over goes on the next available truck
basically it is your responsibility to get quotes and talk with the companies as to how they operate , read forums on their service and then make a decision
remember it does more damage to move just down the street that to move across the country as the care factor is lower for a local move

Jun 21, 2016 | Miscellaneous

1 Answer

To transport a loewe spheros 42 plasma unit with rotating stand does the tv unit detach from the stand? I understand that the plasma tv should be transported in an upright position only is this true?

Yes, it should be transported in upright position.
When we moved, our moving company arranged a crating company to crate our Spheros unit. They built a crate around the TV and secured it in an upright position along with the rotating stand. They then put a tilt sensor (you get the serial number of the tilt sensor) to make sure that the moving people don't tilt the crate. They also un-crate it at your destination. The only problem is that the TV is already quite heavy to begin with (~180 lbs), and with the crate, it becomes almost impossible for the movers move it in perfect upright position....though our movers really tried hard.

Sep 30, 2010 | Loewe Spheros 42HD 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides