Question about Brother Printers & Copiers

2 Answers

I need a phone number to call tec support - Brother Printers & Copiers

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

The phone number for customer service at Brother International is: 1-877-Brother (877-276-8437).

You can also attempt to contact tech support through a variety of other options, provided to you at the Brother International website.

Hope this answers your question, and please do not forget to rate my solution.

Posted on Jul 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Customer service support for Brother Printer is:
Telephone Support: 1-877-276-8437
Fax Support: 901-379-1215
website: http://www.brother-usa.com/support/

You can also contact third party tech support team at +1 (855) 662-4436 or visit: http://www.printersupportcontact.com/brother-printer

Posted on Nov 26, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change from Thermal Transfer to Thermal Direct on Toshiba TEC-SX4


Hi Ryan, refer to sections 5.2 Overview and 5.3.1 Printing Mode Selection from the following pdf manual. Hope this helps.
clip_image002.gif
http://www.cmsitechnologies.com/TEC%20Drivers/BSX45TUM.pdf

May 20, 2014 | Toshiba TEC B-SX4 Thermal Label Printer

1 Answer

Tec sx4 network


Have you checked the port Number.
Tec use port number 8000 and the standard default in windows 9100. Either you change on your printer or in the driver.

Feb 12, 2013 | Toshiba TEC B-SX4 Thermal Label Printer

1 Answer

TEC BSx5 - need to update firmware


In the diagnostics menu choose ramclear and parameter clear should do the trick

Oct 25, 2012 | Toshiba TEC BSX5 Thermal Label Printer

1 Answer

How to configure internal LAN in B-SX4T barcode printer?


I hope thisis understandable.
  1. Switch printer off
  2. Whilst pressing the [FEED] and [PAUSE] keys, switch the printer on. Display shows D I A G . V 3 . 1
  3. Press [FEED] button 6 TIMES or until the display shows I P A D D R E S S
  4. Press [PAUSE]
  5. Press [PAUSE]. Display shows IP Address
  6. Using the [FEED] and [RESTART] buttons, change the 1st number in the IP address
  7. When you have reached the number you want, press [PAUSE] to step to the 2nd number in the IP address.
  8. Again Using the [FEED] and [RESTART] buttons, change the 2nd number in the IP address
  9. Again when you have reached the number you want, press [PAUSE] to step to the 3rd number in the IP address.
  10. Repeat steps 8 and 9 until you have the 4 digits you want in the IP address.
  11. After the 4th number has been entered and you press [PAUSE] you can change the GATEWAY IP ADDRESS.
  12. Step through the above sequences to get the GATEWAY IP ADDRESS you want.
  13. You'll then move onto the SUBNET MASK IP ADDRESS. Same steps as before.
  14. The next and final item is the SOCKET PORT, enter this 5 digit number as above, stepping through each of the 5 elements that make up the 5 digit number.

May 05, 2010 | Toshiba TEC B SX4T Printer

1 Answer

Need a Strandware (not Windows) driver for a TEC


bartender ultra light + driver or use a tecb472 driver (same resolution same language

Feb 24, 2010 | Toshiba TEC B-SX4 Thermal Label Printer

1 Answer

How do you setup the IP address on a toshiba tec b sx4t printer?


In diag mode (pause and feed key depressed switch on )
go to ip adress and change the value or use the instructions
{IP;2,xxxx,xxxx,xxxx,xxxx'} for the ip
{IP;3,xxxx,xxxx,xxxx,xxxx'} gateway
{IP;4,xxxx,xxxx,xxxx,xxxx'} subnet mask
socket port
{IS;1,09100'} for socket number and activation
{IS;0,09100'} for deactivation

Sep 30, 2009 | Toshiba TEC B SX4T Printer

1 Answer

TEC B472 won't print full qty of labels


What is the software used?
Normally the printer will decrement or increment its counters when the correct instructions are sent, If it is the pc that sends the labels then your problem is due to the pc.
Otherwise if the count is internal then external electromagnetic noises may cause this sort of phenomenon.
If it's on a parallel port, then your problem may comme from the vibrations of the printer. The init signal on this port is very near to a gnd pin and with the vibrations this causes a reset of the printer.
Last problem may come from a firmware deterioration. All depends cpu either the firmware is Eprom or Rom.

Jun 29, 2009 | Toshiba TEC B-472 Thermal Label Printer

1 Answer

TEC B 472 QQ


Swapping the parallel port to the printer should allow it to connect via parallel. Run through front panel diagnostics before/after install. depending on firmware it will tell you if the parallel board is installed.

Nov 09, 2008 | Toshiba TEC B-472 Thermal Label Printer

2 Answers

Euro Symbol Printing


0128 is not a recognisable sysmbol Go to the Toshiba web site and the tech Support team- evidently there has been an error in the printed instruct as to the symbol number.

May 21, 2007 | Toshiba TEC BSX5 Thermal Label Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...