Question about Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio

1 Answer

Uniden BC350C Scanner

I am 80 yrs. old and have always had a Bearcat scanner, I think. But this new one is beyond me. I want to program the private bank with my frequency numbers and don't know how to do it. Can you tell me how in plain language? Thanks,

Posted by on

  • roxie16 Aug 16, 2008

    Thank you SO Much!! Worked like a charm and I am so grateful. Just needed the help in plain words and you did
    that!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Start by pressing 'band' & select the band that the freq you want to program is within by using the 'up' or 'down' button, then press 'search' , when you see the display getting close to the desired freq, press 'hold' & then use the 'up' & 'down' buttons to zero in on it. Then press 'program', then press 'private' & select the channel you wish to put it on (1-50). Repeat this process as needed. I find it's easier & faster to program all the freqs within a band as you can assign them to whatever channel you wish within the 50 in the private bank, then do the other bands. Hope this clarifies it, good luck. Regards from Community Communications in Wanaque, NJ.

Posted on Jul 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need scanner frequencies for uniden bearcat bc60xlt-1


Trying to program codes in old scanner - The RadioReference.com Forums

forums.radioreference.com > ... > New User / Getting Started Forum

Jun 1, 2009 - 4 posts
I have an old Uniden Bearcat model:bc60xlt-1. I just created an account on radioreference and hopefully you guys can help me out, the ... uniden barcat bc60xlt
7 posts
Mar 17, 2013
The Betty Bearcat starter frequency guide?
3 posts
Feb 22, 2009
Analog Police/Fire Frequencies
9 posts
Sep 14, 2007
Uniden Bearcat BC60XLT-1
10 posts
Dec 18, 2004
More results from forums.radioreference.com

UNIDEN BC60XLT-1 USER MANUAL Pdf Download.

www.manualslib.com > Brands > Uniden Manuals > Radio > BC60XLT-1

Jan 14, 2016 | Uniden Radio Communications

1 Answer

Is there a video on how to manually program the bearcat scanner BC355C 100 channel to put in my area frequency into the scanner?


Sorry, but there is no such video that I know of. Besides that, your BC355C is not a programmable scanner in the standard sense, in that you cannot enter frequencies via the keyboard. You can, however, transfer a displayed frequency from the SCAN or SEARCH mode into the PRIVATE bank. Fairly simple instructions are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC355Com.pdf

Bill B.
Listening in since the 60's

Jan 13, 2011 | Uniden BC350C Base Scanner

1 Answer

How do i program frequencies into my uniden bearcat scanner bc350a


The BC350C is a factory pre-programmed scanner, so you cannot program it in the standard manner - entering frequencies via the keyboard. You can, however, transfer a displayed frequency from the SCAN or SEARCH mode into the PRIVATE bank. Details for doing this are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Jan 09, 2011 | Uniden BC350C Base Scanner

2 Answers

How do you program a uniden bearcat scanner bc355c


Turn on the radio
Press the "band" button
Keep pressing the "band" button until you come within the parameters of the frequency that you want
Let the radio scan until it gets close to the actual frequency that you're looking for
Press the "hold" button and use the arrow "up" or "down" button till you lock in the correct frequency
Once you have the frequency locked in, press the "program" button
Press the "private" button
The unused channel will be flashing
Press the "program" button, this locks the frequency into that channel
Continue this process until all of the frequencies are loaded into the radio

Jan 05, 2011 | Uniden Radio Communications

1 Answer

I have a Bearcat Scanner (Uniden Bearcat BC145X) how do I set up the chainals


The BC350 is a pre-programmed scanner. You cannot program it in the usual manner (direct keyboard entry of each frequency), but you can transfer displayed frequencies in the SCAN or SEARCH mode to a PRIVATE bank. Detailed instructions for operating your scanner are in the factory manual which you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Dec 10, 2010 | Uniden BC350C Base Scanner

1 Answer

I have a uniden bearcat portable and base I cant figure out how to program it


With the scanner powered ON,

1. Press [HOLD].
“HOLD” appears on the
display.
2. Press [PROG]. CH appears
and blinks to indicate that you
are in the Programming Mode.
To change the displayed frequency,
use [UP] or [DOWN]
while “CH” is blinking.
3. Press [PRIVATE]. “PRIVATE”
appears on the display.
If you want to program it into
another bank, press the
desired bank key. The lowest
open channel appears on the
display.
2 screens alternate to indicate
that open channel is available
to be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use [UP] or [DOWN] to select
a new channel and even overwrite
old channels.
4. Press [PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.

Need the manual? You can download/print it here:

http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Oct 01, 2009 | Uniden BC350 Base Scanner

1 Answer

How to program and delete uniden bearcat scanner 210 XWneed to c


I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:

1. Press the MANUAL key to advance to the channel that you wish to reprogram.

2. Enter the new frequency, including decimal point.

3. Press the ENTER or E key.

4. Start over with step one to continue programming channels.

Jul 31, 2009 | Uniden BCT8 Base Scanner

5 Answers

How to program a uniden bearcat bc 145xl 16 channel scanning radio


I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?

May 31, 2008 | Health & Beauty

4 Answers

Bearcat BC-210


The Bearcat 210 Manual specifically states that the lowest freq available is 32MHz.

Jan 04, 2008 | Uniden Bearcat Pro PC68XL 40-Channels Base...

Not finding what you are looking for?
Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...