Question about Televison & Video

Open Question

I have a Pioneer PDP-R05FE Media Centre attached to a 43" Pioneer Plasma screen. The problem is the tv switches itself off after a few seconds approx 3 times before staying on. Can you help me pinpoint the problem please?

Posted by on

  • noxxx Jan 10, 2009

    I have the same Problem, can anywhere help ???


×

2 Suggested Answers

jerryg50
  • 1635 Answers

SOURCE: Pioneer plasma media receiver problem


The Pioneer multi media reciever box is only serviceable from the manufacture. They should have authorized service reps that they equiped to do service for Pioneer devices. They normaly change boards to service it. The regular service man would only be able to fix a simple cold solder connecton or fix some other simple part of it.

Contact the place where you bought it to find out about servicing it. You may find it cheaper and easier to simply replace it completely. It is very possible that there is no service support for this box. Get an estimate before accepting to service it.

Most of the small electronics of today are throw-away anyways...

Jerry G.

Posted on Apr 13, 2008

dave1645
  • 834 Answers

SOURCE: pdp433-pg pioneer display which media receiver ?

give Tops Electronics in Haverhill Ma a Call they had a couple in stock about a month ago 978-374-9877 158

Posted on Dec 10, 2009

Testimonial: "super"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pdp433-pg pioneer display which media receiver ?


give Tops Electronics in Haverhill Ma a Call they had a couple in stock about a month ago 978-374-9877 158

Dec 10, 2009 | Televison & Video

2 Answers

Pioneer PDP - RO6U Plasma: Says starting up, please wait when turning on. Can't get past this screen. I have tried unplugging and plugging everything back in and am still getting the same error. Are...


unplug it from the power for one hour. Than Press and hold the power button on the on the TV for 20 seconds(It wont show anything. Than Release the power button....

After that plug the power and check the same...

Sep 14, 2008 | Pioneer Televison & Video

5 Answers

I have a plasma tv that has two black lines about 50mm wide running vertically in the centre of the screen


Three kinds of detects count for this problem. It could be the Logic board, or the Logic Buffer board, or the PDP panel. Just drop your tv to the warranty depot shop to repair.


Aug 17, 2008 | Televison & Video

1 Answer

I have a Pioneer PDP 60 inch plasma tv and I just recently noticed a thin line just right of center that starts at the bottom of the screen and goes straight up about 12-15 inches long. When certain colors...


This is Most likely a small crack in the screen the color is actually from the plasma it cant be fixed by yourself but i would reccomend checking the warranty or try taking it back

Nov 24, 2008 | Televison & Video

1 Answer

I have a pioneer 50 inch plasma model no pdp507xda i need a new screen how much will it cost cheers


part #AWU1316 Pdp Service Panel it is listed as no longer avaible because they do not sell the pdp to the public or non service centers
sorry
scott

Nov 04, 2008 | Pioneer Televison & Video

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Televison & Video

1 Answer

My pdp r03u has an error code e01


I have a 50" Unit with this same part, I called Pioneer and told them what was happening, they asked me to count the flashes on the monitor power indicater light and when I told them the problem they told me that it was a dry solder weld, I called a tv repair tech and told him what was going on, he had never worked on Plasma Tv's and was very hesitant to start I told him if I just brought in the Media Box and had him check the solder joints how much would he charge he told me to try he wouldnt charge me anything, I jumped on that! he saw a few issues and fixed them, I brought the unit home plugged it into the tv and the tv works just fine!

Oct 24, 2008 | Televison & Video

1 Answer

Pioneer plasma media receiver problem



The Pioneer multi media reciever box is only serviceable from the manufacture. They should have authorized service reps that they equiped to do service for Pioneer devices. They normaly change boards to service it. The regular service man would only be able to fix a simple cold solder connecton or fix some other simple part of it.

Contact the place where you bought it to find out about servicing it. You may find it cheaper and easier to simply replace it completely. It is very possible that there is no service support for this box. Get an estimate before accepting to service it.

Most of the small electronics of today are throw-away anyways...

Jerry G.

Apr 13, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...