Question about Computers & Internet

1 Answer

Cant install microphone

I bought a MVOX Mv100 microphone. This is what the instructions say:

-------------------------------------------------------------------------------------------------------------
miniVvox MV100 Setup Instructions
_____________________________
(1) Connect the USB cable to the miniVox a plug the other end into the USB port of the computer. The red LED should light up indicating the device is ready to use.

(2) Run your favorite IM or Voice over IP software from your PC and enable the talk feature.
-------------------------------------------------------------------------------------------------------------

I plugged one end into my USB port and the other in my microphone. The first couple of seconds the red light was on and then it went off. What did I do wrong?

Posted by on

  • 3 more comments 
  • crisisxadmin Jul 17, 2008

    How do I know if the hardware is detected?

  • crisisxadmin Jul 18, 2008

    I enabled the microphone, but I do not see if the hardware was detected on the bottom right. It used to said something, but then I un-plugged it and now it says nothing.

  • crisisxadmin Jul 18, 2008

    I dont see an alert.


  • crisisxadmin Jul 18, 2008

    Nothing, I plug it in and the red light turns on for a second, then back off.

  • crisisxadmin Jul 18, 2008

    Its says nothing when I plug in device.


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

First of all check whether when you plug in the microphone to USB port the hardware is detected.
If so then see whether you have unmuted the microphone in your sound setting.
Also run voice setup in your IM's.

Posted on Jul 17, 2008

  • Gavendra Shah Jul 18, 2008

    You get to see that on your right hand side bottom corner. On the taskbar.

    In vista and XP whenever you plug in a new device you get alert on the same.


  • Gavendra Shah Jul 18, 2008

    Tell me what does it say when you plug in the device?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant find the mixer in the ASUS realtek HD audio Manager


when you brought a new microphone in that box their will be a cd install it or download slim drivers or update it

Dec 29, 2013 | ASUS Computers & Internet

1 Answer

Why cant i get the microphone wqorking


Uninstall the gadget. Then follow the full installation instruction. Sometime the companion cd has to be inserted into cd drive and after some time the installation program asks to attach the hardware to pc. Some time it is other way around. Follow the installation guide.

Nov 07, 2010 | Gear Head WC535I Webcam

1 Answer

I just bought a new gigaware earclip monoheadset with mic. the problum is i cant seem to get the mic working the sound works great but i just cant get that voice to work


Hello Mithmar hi, try setting the volume for your microphone, (i'm assuming you are using X P) to do this right click the speaker icon (or the mixer icon) on the lower right side of your screen, you will go to the volume controls section, goto options, then properties, select recording. check the microphone, then click apply/ok. On the mixer there is now the microphone slider. Test your microphone by loading the sound recorder program (start, all programs, accessories, entertainment, sound recorder, press the red button) then shout to the microphone, you should see wave patterns on the recorder, your microphone is working fine. at this point let me know your progress.

Oct 09, 2010 | Audio Players & Recorders

2 Answers

I CAN SEE OTHER PERSON AND THEY CAN SEE ME BUT CANT HEAR ME BUT I CAN HEAR THEM .WHAT HAVE I DONE WRONG


The problem is either the microphone is not connected/faulty or the wrong microphone is selected in the Skype Audio setting.
To check if the microphone is working - go to Start - All Programs - Accessories - Entertainment - Sound Recorder and do a test recording.
If the sound is doesn't work then open Device Manager - Sound, video and game controllers and check the microphone is enabled and working. If it isn't listed or has a yellow ? against the microphone then you need to install the microphone device driver.
If the microphone is working then open Skype then click on Tools tab -then Options - Audio Settings - then in microphone setting and click on the microphone list to select your model microphone. Then Save your settings.
To test your microphone settings then go to Contact list and select Echo / Sound Test.Service and follow the instructions. If this works then your friends will be able to hear you,

Nov 07, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Cant get any sound from mic!!!!


Go into Play control on your computer. Click on options then properties. Look at your settings for playback and recording. Check play control and your source eg. microphone. To reach this double click on the speaker icon in your toolbar or you can find it under sounds and devices in your control panel.

May 23, 2009 | Samson C01U Consumer Microphone

1 Answer

Cant hear recorded videos


Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Aug 19, 2008 | Micro Innovations IC50C Basic Webcam

1 Answer

Microphone not working Need help please


Make sure it's plugged into the Pink Jack on the computer. You probably already know that, but if not hope this helps. Bud

Jul 19, 2008 | Computers & Internet

1 Answer

Cant setup microphone! NEED HELP NOW!!!


I saw the link above. Now when you plug in the device does it get detected by your computer? (You can make it out by looking ot the right side of the taskbar when you plug in the device)
Also tell me which OS are you using.

Jul 18, 2008 | Computers & Internet

1 Answer

Problem


Microphones do not require software or drivers to operate. First, double click on the volume icon located in the system tray. If you do not see the volume control for Mic, then you will need to make it show up by going to Options --> Properties --> Check the box labeled Microphone --> Click Ok. You should now be able to see the volume control for the Mic. Make sure that this is not muted and the sound is turned up. Second, you must have a sound card installed in your computer that supports microphones. Please check with your cards manufacturer or PC manufacturer to make sure.

Jul 06, 2006 | GE EasyCam Plus Webcam

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101466 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...