PENDRIVE NOT DETECT & FORMAT - SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

Dear User,
Please follow these steps.,
connect the pen drive, after autoruns,
please go to my computer-manage-disk management-
in this tab please find the usb pan drive as removable storage drive right click on the pan drive & format the same in the format option please tick the quick format wait for some seconds its format.


if format done, then no issue.................
but if no..............then try below steps.
go to start menu- click run-type "cmd", black screen spears, in that screen please type your pan drive drive name .i.e :-
G: and press enter,
now ur drive is open now please type "format G:" or whatever ur drive name..& again hit enter ur format done this is master formatting process...................if u like please don't forgot me............dear



Thanks,
Dhiren Motivaras

You could try formatting it.
Get a Gparted distribution (http://gparted.sourceforge.net/livecd.php)
Boot the live CD.
Detect pendrive.
Format pendrive in Gparted (fat32 recommended).
Try again in windows.

normaly your pendrive not formated so cmd (command prompt) use.

Run - cmd (type) than enter

format (pendrive colon) than enter

continue process which computer show
your pendrive is formated.

1.
Update Your Windows Operating System.

2.
Check your computer.
with antivirus and antispyware program.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3.
LLFTOOL is a utility for low-level disk drive formatting,
also supports formatting of FLASH cards using a card-reader.

3.a) Download this tool:
http://dl.dropbox.com/u/4040651/LLFTOOL.EXE

3.b) Format pendrive

(WARNING: After running this low level format tool,
the whole USB flash disk surface will be fully erased.
Therefore, data restoration will be impossible after using this utility!)

check pendrive with other computers.If it is not working then pendrive having problem.
Otherwise check your smps, some times if you connect more peripherals,
pendrive will not detect because of power problem.

Assuming that you are using windows, go to drive management and see if the pendrive is detected.
If so, right-click on it and format it.
Or look for the HP USB Disk Storage Format Tool and use it.

if you have an anti virus software the you go on the 4gb pendrive icon and right click and you will see there is an option scan for viruses..Else you can set up manually your software to scan that particular storage drive..

You need to do a low level format on the pen drive and the system drive. I have found by using programs like kill disk is the best way to get rid of a worm virus. A regurlar format will not work, unlike what they say to you. Kill disk will stop all running prorgrams on the drive. What it does it rights zero to the pen the drive. After that you need to do the same to your system drive. Otherwise you will be back to square one.

There is no repair options for transcend pendrives.You can try formatting them, by right clicking on the device driver and selecting format option.Press start and the pendrive is formatted.Also the data in the pendrive will be deleted.Generally if the device is not being detected, then the pendrive can be claimed for a lifetime warranty.

Try to enable your usb ports in Setup mode...

Try to test your usb port with another pendrive...

Reinstall your USB motherboard Drivers...

re-format your pendrive with a hp flash format utility....

Good Luck!