Question about Encore ENHWI-G-RLAM 4-Port Wireless-G 54Mbps Router

1 Answer

ENHWI-G2(NE) Hi i have a PDA (bb) that connects to the above router. PC gets authenticated, has a an ip address settings given by the router's dhcp. The issue is when I try to ping the router/gateway from the BB, it gives me a timeout response therefore phone is not able to browse internet etc. He is not able to ping himself as well. The router is configured as a gateway. Any help is appreciated - nick

Posted by on

  • Anonymous Aug 02, 2008

    i have the same problem here... i have the same router encore ENHWI-G2 i have configurate it using DHCP client and it works perfectly fine with my XP desktop which is wired to it and with my Vista laptop thru Wifi.. though when it comes to my psp and PDA (SE P990i). on my psp iv tried it everal times though sometimes i get connected but ussually i get timed out (connected but doesnt work). with my PDA a sony ericson P990i what ussually happens is then i set my router without Security i ussually get connected but timed out aswell (NO ACTIVITY, NO INTERNET OR WHAT SO EVER) and when i put encription i cant connect at all. hope you guys can help.. would appriciate it that much.. i just wanna make a full use of my router... thnx.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

I would suggest setting the IP, Gateway, DNS and proxy (if it exists) statically on the devices... Just use one compatible with your network (something DHCP would assign for an ip).

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Talk talk, technical assistance


How did you connect the computer to the router. If you are using a DSL modem it will have a DHCP server in it that is allocating IP addresses across your network. If you added the router to the computer via a hub or network switch what is the computers ip .
address. Remove the WI FI router - turn off P.C and then Go to cmd or dos prompt if windows based system and type in ipconfig and press enter to see if ip addresses are 10.0.0.2 if they are your dlink router uses 192.168.0.1 so you need to make the dlink router ip addressand subnet setting to match the Modem ip addresses of the DHCP server. Change the ip address of the dlink router to be 10.0.0.2 and change the modem to allocate DHCP IP addresses from 10.0.0.10 to 10.0.0.255. Only do this if IP addresses are 10,0,0,1 to 10.0.0.,254 on the desktop p.c with the dsl or cable modem connected.without the router being involved. (you may need to ask the ISP what the user name and password is of the modem and it should be ip address xx.xx.xx.1 so type this into a browser to change the modem settings. 10.0.0.1 or 192.168.0.1 just remember if the modem is 192.168.0.1 so is the Wi router from d-link and you will have an ip clash problem)
. How do you do this by ethernet connection from only the desktop directly with only the Wi FI . router. Go to a internet browser and type in the URL 192.168.0.1 and then change the router ip address to match what the DSL modem DHCP issues..
Page 14 of Router instructions see http://files.dlink.com.au/Products/DIR-615/Manuals/DIR-615_C2_Manual_v3.10.pdf
in the manual it states to use a direct ethernet connection for the setup program but you need to be connected to the internet for it to work but if the IP addresses are wrong or clashing will have no internet. You also want to set the modem as the DCHP server and disable the DHCP server in the set up of the wi fi tand set the WI FI router default gateway as the ip address of the Modem. if any DHCP server options in the WI FI router sert to the modem ip address. .

Sep 08, 2014 | D-Link D Link Dir 615 Wireless Router...

1 Answer

How to get my password


Your default IP Address username and password are given below
Default IP Address: 192.168.1.1
Default Admin Username: admin
Default Admin Password: admin
If you are having further doubts regarding the Router please visit the following link (http://www.speedguide.net/routers/encore-enhwi-g2-80211g-wireless-router-54-mbps-618 ).Hope you are satisfied with my solution.Your valuable feedback would be appreciated.Thanks for choosing Fixya.

Jun 12, 2011 | Encore ENHWI-G2 Router

1 Answer

I have no internet connection when i connect my adsl router with enhwi g2 router in WAN, then from lan1 connect my pc. Please solve my problem. Tnx


First test to see that you can connect to the Internet by connecting directly to the modem.

If yes, then check that the cables are connected correctly and that the LEDs are on. (Just a check :). Telephone line to LINE IN on modem then Ethernet/Cat 5 from LAN port on modem to WAN port on Encore router, then Ethernet/Cat 5 cable from LAN port on router to PC.)

Use browser (Internet Explorer, Safari, Mozilla) to connect to web interface of router (make sure your TCP/IP settings on PC are set to obtain IP address using DHCP).

Open browser and type in the IP Address of the router (192.168.1.1 is the default) where you usually type in the name of the website you want to go.

Go to the LAN Interface Setup page (you are now inside your router).

Change the IP Address from 192.168.1.1 to 192.168.89.1 (leave the subnet mask as it is).

Change the DHCP Client Range from 192.168.1.100 - 192.168.1.200 (the default) to 192.168.89.100 - 192.168.89.200.

Click on Apply Changes button.You may lose connectivity to the router, but you can reconnect by typing in the new IP Address 192.168.89.1. You may need to renew the IP address of the PC, but that can be easily done by rebooting the system if it doesn't happen automatically.

Let me know how you go, or leave a message if you still can't connect. I would ask that you tell me the model of the ADSL modem however.

Cheers

Dec 17, 2010 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

No internet on PC when cables going through router


Hello there,

You have to start from the beginning and my solution would be:

1) Remove any connections(also don't forget to turn of wifi on your laptop) to router and except the power cord. With the unit powered ON locate the reset pinhole on the back of router.

2) Press and hold reset button for at least 15 secs. then release, wait for 20-30 secs. before the router can completely rebooted.

3) Configure your Computer IP address to “Obtain an IP address automatically” .

4) Connect internet cable to router on port labeled "WAN". Connect PC to any LAN ports available.

5) Now lets configure wireless router. Open any browser you have (IE, Firefox, Chrome, Safari, etc.). On the address bar type: "192.168.1.1" (without quotes). Default username: admin ; default password: admin click "OK".

6) Go through "SETUP WIZARD" until you reach the "Setup WAN Interface" page. On "WAN Access Type:" select "DHCP" then click next.

7) You may configure your "Basic Wireless Settings" to Public or Private until finished configuring.

8) On "Operation Mode" be sure you operate on "Gateway" mode.

That's it! Hope this helps.

Don't forget to vote.

Mar 12, 2010 | Encore ENHWI-G2 Router

1 Answer

Installing encore enhwi-g2 router wuithout cd rom


You can configure the wireless router from unauthorized access by connect a LAN cable from the computer to the router and open a browser and enter the router's configuration URL IP address.
To secure your wireless network from unauthorized access please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Mar 07, 2010 | Encore ENHWI-G2 Router

2 Answers

Network card doesdie not acquire DCHP internet address from router. Router port and cables verified.


Hi,
As you have said that your router assigns IP address to some other computer, its obvious that there can be no problem with your router.
So please try the following steps:
Goto your network adapter settings page

b21d8d7.jpg

Select the circled options.
7d4f475.jpg

Provide the above settings. click ok.
Now disconnect the cable from your router and connect it back.
Everything should work fine, if DHCP is working properly in your router.
If still problem persists, then try "Use the following IP address " option in the above dialog box and provide IP as follows and try again.
0c81de8.jpg
Please ensure and change gateway and ip according to your router.
Gateway ip is the one which is your router ip ( the one which you give in internet explorer to enter into your router settings page)

In this way you should be able to connect to your router. If successfully connected, then it also implied that DHCP is not properly running in your router and now you have connected to router by providing an IP address manually.

I hope this is helpful in solving your problem
Thanks


Mar 06, 2010 | Computers & Internet

2 Answers

Encore Wireless Router Wireless connection problem


You need to have a cable connection from the laptop to the router first then go to the router setting by typing something like 192.x.x.x which differs from router to router.This should be available in the manual or in many cases are printed underneath the router.Once you get to the set up page for the router then you can set up the encryption type and create a key which will be needed by the laptop to connect to the network.Hope this helps.

Dec 15, 2009 | Encore ENHWI-G2 Router

1 Answer

Installed WRT54G2 With ATT Motorola DSL and cannect to internet. dsl worked fine before installing the Modem had AT&T recheck the dsl and was configeration correct was advised that my problem in...


hi there ...

your isp is at&t? please verify the ip address straight to the modem if its is 192.168.1.1 and if your modem from your isp is set to DHCP or BRIDGE mode.

IF IP address is 192.168.1.1 (DHCP)
... change the LAN IP address of the router to 192.168.2.1 or 5.1 to prevent any IP conflict
by doing this :

1. access setup page of router usually 192.168.1.1
2. under setup tab look for the ip address, change it, then save
3. click on the status tab , and look for a VALID ip address

IF MODEM is set to BRIDGE mode
.... please ask username and password from your ISP coz we would need to set your router to PPOE...
1. access setup page
2. under setup tab look for INTERNET CONNECTION TYPE
3. select PPPoE
fill in username and password
select "keep"alive
save
4. click on status tab
look for LOG in TYPe ===> click CONNECT
if connected : check a valid IP address
if authentication failed verify again your username and password from your ISP

Goodluck!


Aug 07, 2008 | Linksys WRT54GX2 Wireless-G Broadband...

2 Answers

Internet connection speed of the Encore ENHWI-G2


if you're router is in the B+G setting, try setting it to the B setting, this is because the wireless adapter in the i-phone/i-touch uses only the B setting, sucks for most part.. but that got my i-phone working like a charm.. hope this helps

Jul 16, 2008 | Encore 802.11G WIRELESS LAN ROUTER...

1 Answer

Laptop connects, but main computer doesn't....


if you have the router set to enable dhcp which gives your network cards an ip address automatically, then check that the network card of the main pc is set to obtain ip addresss automatically, this is in network connections, right click on network connection icon, properties and on the TCP/IP line click properties and check that 'obtain ip address automatically is ticked, apply and ok. Igf you have tried to repair the connection using wizard, then your settings will have been changed, thats possibly the problem. Also go into the routers settings and see if the main pc is listed under dhcp clients and that an ip address is given.

May 16, 2007 | Belkin (F5D5231-4) Router

Not finding what you are looking for?
Encore ENHWI-G-RLAM 4-Port Wireless-G 54Mbps Router Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encore Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Encore Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...