Error no 5200 occurred - Canon PIXMA MX320 Color USB InkJet Printer

Canon Printer Error 5200 may occur if the ink level in your printer is low or if you have a defective ink cartridge. Follow the steps to fix Canon printer 5200 Error code:

·Refill your cartridges/Ink tank
·Clean printer cartridge
·Factory reset printer

Find here the more canon printer error codes and their solutions.

This is occur due to few things, first you have to check your document is not corrupt, if it is ok then you need to restart your printer once.

See: http://www.canon.co.uk/support/consumer_products/product_ranges/printers/pixma/error_codes/#5200
5200/P08 - Orange and green light blinking 8 times Description:

A service error has occurred.
Resolution:

1. Turn off the printer.
2. Disconnect the power cable.
3. Open the printer cover.
4. Check for any orange protective tape or white polystyrene and remove if necessary.
5. Check that there are no foreign objects in the printer (such as a paper clip) and remove if necessary.
6. Close the cover.
7. Reconnect and turn on.

If the above solution has not resolved your error, please contact your nearest Canon authorised service facility using the link at the top of the page.

41.2 error hp laser jet 5100
am from Ethiopia but when am check and replace the Formatter board ,beam not working but when am replacing the DC controller and all connecting cables to beam, then it was working god .

Hi Nolan,
Error code 5200 indicates that print head temperature error occurs. This error usually occurs in case of ink low or third party or refill ink usage.
I hope the following link will answer your question clearly. :)

Canon Printer Error 5200

49.XXXXX ERROR alternates with To continue turn Off then On 49.XXXXX ERROR alternates with To continue turn Off then On

Explanation

A critical firmware error has occurred.

Recommended action

1. Turn the printer Off and then On.
2. If the message persists, contact HP Support.

Mainly canon ip printer show 5200 error. It means your printer's hardware may be in trouble. It may be occur in your paper feeder unit. printer head unit or due to various kind of sensor. try to find what kind of unit is in trouble.
Thank you

Error 5200 indicates that the print head temperature has exceeded the specified value. Turn off the printer and then turn on, if error still persist replace ink cartridge or print head.

Dear team2,
Code 5200 indicates 'Ink cartridge temperature rise' error occurs. This error commonly happens when cleaning operation is performed. First, please check if there is enough ink in ink tanks. Cleaning with empty ink tank may cause this problem. If you are sure that you have enough ink in ink tanks means that the print head of the printer is faulty and need replacement.
Hope this will be useful for you. Please rate me as Fixya.
Regards