Question about HP PSC 2410 All-In-One InkJet Printer

6 Answers

Error 232 receiving fax

Do you know what error "232" means? I'm not able to receive a fax. Report says "Result" Error 232. I have all in one HP PSC 2000 Series 2410.
I'm able to send faxes


Thank you

Posted by on

  • 3 more comments 
  • dodgewhited Sep 02, 2008

    I have the same problem. How can this be fixed? Comm Error 232. It does not occur consistently. I have the HP 3050 all-in-one.

  • Anonymous Nov 05, 2008

    error 232 receiving




  • Anonymous Jan 07, 2009

    I have the same problem. I can send but not receive faxes. It says in the results on my print out that there is a Error 232* I have a HP Officejet 6110 all in one printer.

  • sales4 Apr 07, 2009

    I have the same problem.I can not recive the fax often.some times i am reciving Why so?

  • Anonymous May 13, 2009

    I received this error as well. I have the HP officejet 4215...How do i fix it?

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Fax error 232 indicates a communication failure between the sending and receiving units. I'd check for line noise on the phone (you can hear it as cracks and pops) If your fax line is not dedicated, any noise from another phone pickup or an answwering machine can cause the failure.

Posted on Sep 08, 2008

  • like_netu
    like_netu Feb 04, 2012

    u are correct and just off the ECM mode of fax .. that will do

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a HP J4540 all in one, I can send faxes, and sometimes recieve faxes, when recieving it sometimes gives and error code 232. I have a dedicated line, no line noise, and no answering machine. I have done the fax test and everyting passes. What can you tell me that will fix this problem

Posted on Apr 28, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The solution is to throw out this HP **** out of the window. Believe me people, this is a MECHANICAL error, and it is waste of time to troubleshoot this. Buy a Xerox or Brother instead.

Posted on Aug 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Error 232 can occur during execution of the convert function. It can also occur during implicit conversion within Adaptive Server, either during a stored procedure run or during execution of a SQL statement which converts a float value to some other datatype.

Posted on Jul 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. I can send but not receive faxes. It says in the results on my print out that there is a Error 232* I have a HP Officejet 5610 all in one printer.

Posted on Aug 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Oh Brother, never again a Brother .....

Posted on Jun 25, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I receive 1 page of an incoming fax but then the next page is a fax call report saying comm error 232


Try this...
a) changing the Error Correction Mode (ECM) to OFF
b) disabeling V.34 option

steps for
a) Fax setup -- All faxes -- Error correction -- OFF
b) Fax setup -- All faxes -- V.34 -- disable

Mar 31, 2010 | HP LaserJet 3050 All-In-One Printer

1 Answer

Fax rec 2-3 pgs OK, then disconnects and gives Comm Error


These errors mean that the communications have failed, and can mean that the receiver at the other end has terminated the call prematurely.
If the problem occurs with the same destination, then the receiver fax may be the problem.
If the error persists try disabling ECM

Feb 04, 2010 | HP LaserJet 3055 All-In-One Printer

1 Answer

HP Officejet 9130 incoming faxes are not being recieved properly. All we get is FAX report that under column heading Result has "Error 232". Can you advise what this means please? Brian Prior - Community...


Hi there,

If the faxes are not printing or are printing incorrectly
Check the media supply.
- The all-in-one cannot receive faxes, if it is out of media and its memory is full. Load media. The all-in-one will print all of the faxes that it has saved in the memory and will resume answering fax calls.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

Nov 26, 2009 | HP Printers & Copiers

1 Answer

Fax comm error 232 problem


Hello sir ; Why don't try to replace a phone cable or check the wall jack.

Aug 28, 2009 | HP LaserJet 3050 All-In-One Printer

1 Answer

Error codes 283 and 232 in received Faxes


basically error 232 indicates that a communication failure has occurred between the two machines
Following these steps may help resolving your issue

1. Make sure that the phone cord is plugged directly from the wall jack into the back port of the fax machine that is marked "Line" or "To Wall Jack", or that has a wall-jack symbol.
2. Verify that the line interface unit (LIU) (the box that the phone cord plugs into) is seated fully into the back of the fax.
3. Remove any other device from the line such as splitters, credit card machines, or telephone answering machines, and retry the fax communication.
4. Try sending and receiving faxes on a different fax line.
5.Try using a different telephone cord.
6. Have the phone company test your line for static or noise problems.
7. Disable Error Correction Mode (ECM) if the same error occurs repeatedly.

Hope this helps.
thx

Jun 02, 2009 | HP LaserJet M1522nf Multifunction Printer...

1 Answer

Error message 232


Hello Lazylizard, basically error 232 indicates that a communication failure has occurred between the two machines
Following these steps may help resolving your issue

1. Make sure that the phone cord is plugged directly from the wall jack into the back port of the fax machine that is marked "Line" or "To Wall Jack", or that has a wall-jack symbol.
2. Verify that the line interface unit (LIU) (the box that the phone cord plugs into) is seated fully into the back of the fax.
3. Remove any other device from the line such as splitters, credit card machines, or telephone answering machines, and retry the fax communication.
4. Try sending and receiving faxes on a different fax line.
5.Try using a different telephone cord.
6. Have the phone company test your line for static or noise problems.
7. Disable Error Correction Mode (ECM) if the same error occurs repeatedly.

Hope this helps.
thx


Oct 07, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

How do i retrieve fax report from hp 4215 all in one


1 Press Setup.
2 Press 1, then press 1.
This selects Print Report and then selects Automatic Reports Setup.
3 Press ! to scroll through the following report types:
– Every Error: prints whenever there is any kind of fax error (default).
– Send Error: prints whenever there is a transmission error.
– Receive Error: prints whenever there is a receiving error.
– Every Fax: confirms every time a fax is sent or received.
– Send Only: prints every time a fax is sent.
– Off: does not print fax reports.
Note: If you select Send Only, you will also receive error reports if there is
any kind of error generated.
4 Press OK to select a report

More information? you can download manual here
http://h10032.www1.hp.com/ctg/Manual/c00095626.pdf

Sep 05, 2008 | HP Officejet 4215v All-in-One Printer

1 Answer

Confirmation page


You can configure your HP all-in-one so that it automatically prints error and confirmation reports. If you need printed confirmation each time a fax is sent, follow these instructions before sending any faxes and select Send Only. To set automated report options from the control panel Press Setup. Press 2, and then press 1. This selects Print Report and then selects Fax Report Setup. clip_image001.gif Press to scroll through the following report types: Every Error: prints whenever there is any kind of fax error (default). Send Error: prints whenever there is a transmission error. Receive Error: prints whenever there is a receiving error. Every Fax: confirms every time a fax is sent or received. Send Only: prints every time a fax is sent indicating whether the fax was successfully sent or not. Off: does not print any error or confirmation reports. Press OK to select the report.

Jul 29, 2008 | HP OfficeJet 6210 All-In-One InkJet...

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

11,497 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...