Question about Nortel Meridian M7208 Corded Phone

1 Answer

Access Denied I have been attempting to change the date & time programming which I always do from my phone in the office. I press 'Feature' **ADMIN (23646) & it reads access denied - cannot get around the access denied - would you be able to help.

Posted by on

  • 1 more comment 
  • Anonymous Jan 07, 2009

    i tried feature**797836 and gave me an access denied display..feature**266344 doest work for my phone version





  • Anonymous Jan 10, 2009

    I can enter admin however when it asks for the password it will not allow me to enter one.

  • Anonymous Mar 24, 2014

    denied in admin message when I try to program call pick up

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 44 Answers

Dear joanmyers,

You may want to try the CONFIG mode to change the time. Press Feature **266344 and depending on they version of the software (i.e, DR5) you may be able to change the time in the system configuration.

Good luck!

Posted on Jul 29, 2008

  • cindyliardon Aug 08, 2013

    I need to change name and settings on an M7208. I can't get into the Systems Administrator screens. I've tried **8463, **23646 and **266344. All of them give me "Access Denied". Any suggestions?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove Denied in Admin from a Nortel phone handset t7208


It's not so much removing Denied in Admin as it is enabling whatever feature the user was trying to access at that set.
Which was... ?

Aug 11, 2014 | NorStar T7208 Corded Phone

1 Answer

When dialing out on Mitel 5212 IP phone it gives "access denied error message


Call your office admin or tech that programs the system at your site to allow access.

Nov 29, 2012 | Computers & Internet

1 Answer

I'm trying to change the display names for each extension but when i try the **266344 a user id option pops up....not for a password. What do i do?


Try pressing the FEATURE button then, **266344. On some Norstar phone systems there is also an Admin level of programming that is useful if you only need to change the names or the time. To access Admin programming, press Feature**23646(spells admin on the dial pad). Then 23646 for password.

Feb 24, 2011 | NorStar T7316E Corded Phone

1 Answer

How do I change the time on my Panasonic KX-T7736 phone?


The time can be set through system admin programming at an extension that has been allowed this ability, usually the attendant phone. To access system admin programming press <program> **1234(1234 is the default password). Once in programming dial 000 for time/date. Use the LCD navigation keys or the jog dial to scroll through the date to get to the time, after setting the time press <enter> to save the new time then lift handset to end programming session.

Dec 08, 2010 | Panasonic KX-T7736 Corded Phone (KXT7736)

2 Answers

How do i set the time?


  • Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
    If asked for a password enter the same 2 3 6 4 6.

    If that doesn't work you may have the newer Compact ICS or the Modular 0x32 control unit which will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
    When in programming2.gif just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, just press back (lower left)
    Example: To change the Time & Date Press next until you see Time & Date. Then show Then change Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.
on older systems like the 616 or 8x24, when you enter in the login and password the screen will display "A configuration", press next til you see "B general admin" press the show key the display should say "1 speed dial", press the next key til you see "3 time and date"press your show key and follow the earlier directions

Oct 12, 2009 | NorStar T7316E Corded Phone

1 Answer

How do you set the time and date in the display?


  • Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
    If asked for a password enter the same 2 3 6 4 6.

    If that doesn't work you may have the newer Compact ICS or the Modular 0x32 control unit which will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
    When in programming2.gif just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, just press back (lower left)
    Example: To change the Time & Date Press next until you see Time & Date. Then show Then change Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.
on older systems like the 616 or 8x24, when you enter in the login and password the screen will display "A configuration", press next til you see "B general admin" press the show key the display should say "1 speed dial", press the next key til you see "3 time and date"press your show key and follow the earlier directions

Aug 31, 2009 | NorStar Meridian M7310 Phone

4 Answers

Norstar CallPilot 100: need to change the time within the system to reflect daylight savings time


the time change goes off the system time to change system time press feature **7463 enter the admin password then press change and enter new time

Mar 09, 2009 | NorStar CallPilot 100

1 Answer

DND Feature turned on


DND feature is 85.
To cancel DND press FEATURE # 8 5 on the set with the issue.

Feature 69 is for priority calling...

Feb 29, 2008 | NorStar Meridian M7310 Phone

7 Answers

Change time on nec dterm80 phone


Press the "Speaker" button and enter 728 on the key pad. Then enter the correct time in 24 hour format. For example at 2.56 p.m. type 1456. Then press speaker again and you're done

Jan 17, 2008 | NEC Dterm DTP 16D-1 Corded Phone

Not finding what you are looking for?
Nortel Meridian M7208 Corded Phone Logo

2,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

dan4261

Level 1 Expert

14 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...