Question about Microsoft Windows Server Standard 2003 for PC

1 Answer

Booting process Sir, Could you please explain me after switching on the PC , till we get windows screen in between what is the happening .

Posted by on

  • venugopal_i Jul 17, 2008

    Sir i did not get you.Could you explain me indetal.(that means what is post and RAID

  • venugopal_i Jul 17, 2008

    Thanks a lot for your valuable information.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

First you get POST (power on self test) where hardware is initialized, then any initialization of RAID if it is installed and enabled, then verifying DMI pool data, where it gets boot information from the boot device specified in the cmos, then the operating system loads.

Posted on Jul 17, 2008

  • Jerrod J
    Jerrod J Jul 17, 2008

    Post is power on self test, when the computer checks all the hardware and assigns IRQs (interrupt request numbers), which is how the processor talks to the hardware. RAID is Redundant Array of Inexpensive/Independent Disks, which is how a lot of servers assure that no data is lost in the event of a hard drive failure.

    Here is some more information about the boot process.

    Is there a specific thing you need to know about?

    Hope this helps


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows won't load, so can't get on computer


so explain to me a little more on the booting of this computer. Does the logo screen come up and what happens after that??

May 21, 2014 | Acer Am3910-b4092 2.8ghz4gb1 Tb Tv...

1 Answer

I compressed files for more space,now i can' reboot to windows.My screen says,Bootmgr is compressed(press ctrl+alt+del to restart but nothing happens.keeps booting back to that screen.Please help!


When the computers is booting up try pressing f8 till you get to a black screen and click last known good configuration... This should help.... Or else you'll need to install the operating system again

Nov 22, 2013 | Dell Precision M90 Notebook

2 Answers

Wont boot up


You should kindly explain how it started, what happened and symptoms you see.
Try this:
1. When you try booting and you can see your operating system (OS) e.g 'Windows Vista' appearing on the screen and not giving you a successful booting, then repair repair Windows or formating using your Operating System software.
OR
2. When you try booting and you can't see anything on your screen or not even a sign of booting, try and confirm if your motherboard is still good. And if bad a pin board can be fix and pinless board unfixablr.

Jun 10, 2011 | Computers & Internet

1 Answer

My fujtsu siemens laptop is not booting from the hardrive and all i am getting in the fujitsu siemens sign and then a blank screen with a underscore flashing when i was on my laptop before i had a virus...


try booting up in safe mode, switch the pc on then keep pressing f8 till a menu appears use the arrow keys to highlight safe mode, then press enter. If windows starts up run a virus scan

Apr 10, 2011 | Computers & Internet

1 Answer

Not getting display


when you start booting your laptop wait till you see second booting screen and start pressing F8 when new menu will be open choice last good know settings and press enter.

Dec 22, 2008 | Computers & Internet

1 Answer

Problem in booting then only mouse pointer display on the screen


Sounds like you messed it up well!

Suggest you cut your losses and just reinstall the system afresh
but first try booting from the install DVD and going through the process until you reach the options to install or repair
Select Repair and let the DVD try and fix it

With Acer I think you press F11 or F12 when booting to get the one time boot choice.
When you have it just select the DVD player the disc is in and let it do its thing

Dec 10, 2008 | Acer Aspire 5610-4648 Notebook

1 Answer

Compaq presario 700 problem in booting


when starting press f1 or del it will enter into the bios there kept bios default settings and exit the bios and then see the system , till the same problem try to clear cmos

Mar 27, 2008 | Compaq Presario 700 470024-192 Notebook

3 Answers

Boot up problem


press F8 rapidely while booting
choose safe mode
go to My computer->properties->system restore
restore to the last good working restore point
good luck



don't forget to vote

Jan 19, 2008 | Computers & Internet

2 Answers

Presario SR1030AN Turning on but not booting or POST or no any beep at all.


Have you tried switching the power supply out with one that is known good?

Nov 26, 2007 | ASUS A7V8X Motherboard

Not finding what you are looking for?
Microsoft Windows Server Standard 2003 for PC Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...