Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Cycle is off

The cycles on my washer are off. when i start a load in the washing machine - it automatically starts agitating filling with water. this has occurred one other time, but eventually it reset itself - this time - no such luck. end the end when the machine says it is finished rinsing and spinning - it still has water in it!!!!! is there a reset button?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

When you look at the timer schematic it has a time reference showing agitation doesn't start until fill is completed. Sounds like switches 5, 5a and 16, 16a are stuck. You need that timer replaced.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 21882 top load Kenmore washer will start the cycle but stops after filling up; i can restart the cycle by pushing the knob in and going a little further in the cycle then starting again. But after a...


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    My wahser just stopped working it filled with water and then started agitating and then all the sudden stopped please help


    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    Whirlpool washer WTW57ESVW0 won't fill with water. I bought this machine two months ago was working fine and then just stopped filling water. Spin cycle and drain cycle work but it won't start fill...


    Solution for WTW57ESVW0 Whirlpool Washer that won't fill or agitate, but will spin and drain water.

    Replacing the Auto Load Sensing Switch (W10177795 - Illus. No. 12 on Control and Rear Panel Parts) fixed the problem.

    In addition, a defective switch can also cause the machine to start agitating while it is filling.

    It is relatively easy to replace and there are online videos that can help with the replacement.

    Oct 27, 2010 | Washing Machines

    1 Answer

    My frigidaire front load washer will start a wash, complete the first cycle but then stop and flash all the lights and beep continously until I press "start" or "cancel". If I press "start" again it just...


    Hello there:
    If your cycle does not complete or The cycle doesn't advance
    When the cycle should advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. than check the cold water supply line and the filter

    Aug 15, 2010 | Frigidaire ATF6000ES Front Load Washer

    1 Answer

    Does washer drain before the spin cycle starts?


    Normally yes. There are around 12 to 20 gallons of water in the tub after the wash cycle, which will be anywhere from 63 to 110 pounds of weight in addition to the weight of the clothes. For the machine to start the spin cycle to remove this water would place a heavy load on the motor, gearcase, pullys, belts, gears, ect. With the water drained, the load is lighter, and much easier to start spinning the excess water out of the clothes. The normal cycles are: Fill, Agitate, Drain, Spin, Rinse Fill, Agitate for rinse, Drain, Spin Cycle and off. Imagine trying to spin a 5 gallon bucket of water over your head, full of water, and then empty. Which one do you think would be easier to do? And safer for you.

    Sep 26, 2009 | Admiral AW22 Top Load Washer

    1 Answer

    Agitator starts at begining of cycle before washer is full


    Please be carful as running the agitator without enough water will overheat and kick out the motor, however it should be ok when it resets itself.
    Yes, the machine should stop agitating when you lift the lid so this too is part of the problem.
    After looking at the print I can only suggest that the cam contacts in the timer ( contacts 12 and 14) that start the motor are burned and stuck together.
    Quentin

    Sep 17, 2009 | Frigidaire FEX831CS Top Load Stacked...

    1 Answer

    Washer won't wash


    Hi!
    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
    It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
    It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
    Please do rate this solution as FixYa and revert for further assistance.

    Thanks
    Rylee

    May 30, 2009 | GE Washing Machines

    1 Answer

    Stops in the middle of wash cycle


    Hi!

    If the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
    It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
    It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
    Please do rate this solution as FixYa and revert for further assistance.

    Thanks
    Rylee

    May 29, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

    1 Answer

    Frigidaire (LTF2940E) Washer starts, stops, starts, stops...


    The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

    • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


    • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

    1 Answer

    Washer will fill with water but the agitator won't spin.


    No agitation or spin in any cycle? If so and the machine will drain check the coupler.

    Oct 08, 2008 | Kenmore 24032\24036 Top Load Washer

    Not finding what you are looking for?
    Kenmore 24032\24036 Top Load Washer Logo

    71 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Jesus  Colon
    Jesus Colon

    Level 1 Expert

    12 Answers

    Fred Sops

    Level 2 Expert

    271 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...