How to charge a motorola droid with a broken micro usb port?

Get the proper USB cable to fit the connection on the phone and plug it into a port on your computer and leave it plugged in overnight.

Honestly, even if you could find the part (not likely - tablets are commodity items these days), you would need specialized tools to de-solder the remainder of the old port and solder the new port, and you would risk damaging other components because of the proximity of parts on these small circuit boards. If you want to take it on, research who actually builds the tablet and contact them about parts. A better option might be to find one with a broken screen or some such (check local 'for sale' sites) and try to swap only that part (if the charging port happens to be connected to a smaller 'side' board rather than the main board). Tough one. Good luck.

Motorola doesn't endorse/support this type of modification.

Mark
Motorola Support

Will your droid 4 charge with other non-Motorola chargers?

Mark
Motorola Support

my usb port is pushed down

The first thing I would check is your charger. Sometimes the USB charging head stops working, or the cable between the charging head develops an open circuit and power is not delivered to your phone. I would first try another charger (such as your car charger), or perhaps someone else in the house has a charger, and see if that gets your phone to charge up. If you don't have another charger, try plugging your cable between your computer USB port and your phone to bypass the charging head, and see if that gets your phone to charge.

If not, take it to the local Verizon store and see what they can find out or what your replacement options are. A week ago, Verizon was having open enrollment into their Verizon Protection and Support plan. For $10 a month, I was able to get my Droid Razr Maxx replaced which had an issue with the earphone jack. Since I am grandfathered into an unlimited Data plan, this was the cheapest way to deal with the defect.

Good luck.

Hi, you can buy new ones from here 2 pcs Replacement Micro USB Charging Port Connector for Vizio Tablet... and change it . take a look. enjoy

Use this driver to fix this issue.

In order for the computer to recognize the Droid, you must "Mount" it.

To do this, first plug in the usb cord to the computer and the droid. Then touch the notification bar on the top of the droid and draw your finger down. Touch "USB connected". A popup screen appears asking you if you want to "Mount". Choose "Mount" and the Droid will appear as another drive on your computer.

Hope that helps.

i don't think Panasonic designs its camera to be charged via USB. You will need a actual charger to charge up your camera. this link should help