Question about Computers & Internet

1 Answer

MultiScreen, start menu to all?

Is there a program out there I could use or somekind of tweak so I would have the same start menu on every screen. cloned basicly. 

Or something to this direction?

Posted by on

  • 3 more comments 
  • Ekse Jul 17, 2008

    windows xp


  • Ekse Jul 18, 2008

    I needed a program to get my start menu extended to all of my screens which I got 3 - 22" lcds now.

    well I found the program myself

    http://www.mediachance.com/free/multimon...

    Thanks for trying though but did you actually read the problem?

    Thanks,
    Ekse

  • Ekse Jul 18, 2008

    Just needed the task bar to be added into the extra screens, they working fine otherwise.


    http://www.mediachance.com/free/multimon...

  • Ekse Jul 18, 2008

    TaskBar (freeware)




    • It adds second taskbar to the extended desktop on Monitor 2

    • It can add third taskbar to the second Extended monitor if you have 3 monitors setup.
    • It shows only applications from that Monitor

    • It hides the applications on Monitor 2 and 3 from normal Windows Taskbar
    • Adds a Move to Monitor button to windows applications (XP).
    • Add Text Clipboard Extender
    • Buttons to roll-right the taskbar (good for full screen Remote Desktop)
    • Very carefully written, I don't want to crash my own desktop!

  • Ekse Jul 18, 2008

    I have these 3 x 22" lcds on my home computer.



    http://www.cinemassivedisplays.com/





    Heres a good page about why use multiple monitors

    http://www.cinemassivedisplays.com/why-m...





×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 160 Answers

Right click the desktop, go to display properties. Clear the box which says "Extend my Desktop to this monitor" for the second monitor.

If your video card has it's own device manager (in the lower right hand corner of the task bar), you would find a similar setting.

Posted on Jul 18, 2008

  • Alan Iroff
    Alan Iroff Jul 18, 2008

    Ekse, I'm sorry I didn't completely understand your problem. You didn't say how many screens you had - usually when people have multiple screens, they mean two.

    I assume that if you have 3 or more screens, you may be in a class room environment - if that's true there are some very good programs for sharing a screen with a large number of desktops.

    I'm glad you found a solution that works, and thanks for the "Thanks for Trying" feedback.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is picture divided into six?


Have a look at the picture settings in the menu options.It seems that you have accidently changed it to multiscreen. Select normal and then OK. It should revert back to a single screen.

Apr 05, 2016 | LG Televison & Video

Tip

Tweak and Securing the Start Button in Windows XP.


Tweak: Disabling Right Click on Start Menu

Before you start to use the Tweak make sure you Create a System Restore Point or have Backup before applying this.

You can use this Tweak for Securing your Desktop .
This tweak will help you to hide the Options which appear when someone Right clicks on the start menu & try to explore.
To use this tweak follow the steps below:

  1. Open Registry Editor (regedit.exe).
  2. Navigate to HKEY_CLASSES_ROOT\Directory\shell & to HKEY_CLASSES_ROOT\Folder\shell
  3. Now rename the key shell to shell.old
  4. Now reboot your PC.
If you want to show it again then rename it to shell again.

Good luck!

on Jun 17, 2010 | Computers & Internet

Tip

Speeding Up Start Menu Button in Windows XP


Speeding up the Start Menu (Windows XP)
Most of us are experiencing delay (slow) opening the StartMenu when we click over it to open the All programs, and others features whichare attached to it. We can speed up this by tweaking the registry withoutaffecting to the operating system. This default speed can be adjusted with aquick Registry modification.
To do this, go click run – type regedit, the registry editor window will open, go to HKEY_CURRENT_USER
HKEY_CURRENT_USERControl panel
HKEY_CURRENT_USERControl panelDesktop
HKEY_CURRENT_USERControl panelDesktopMenuShowDelay.
Double click MenuShowDelay to open, you’ll notice that thevalue is 400, now set it to 0 (zero), click OK and close the registry editor,now check the speed of the whether it has taken effect or not. The Start MenuSpeed should have been changed to full speed by now.
For better reference, I've included the graphical representation to perform this tweak step by step:
9cbb367.jpg
7f0b66f.jpg
c293308.jpg
Try this yourself and enjoy the speed of the Start Menu in windows XPwithout spending a penny or installing additional applications. Good Luck.

on May 10, 2010 | Computers & Internet

1 Answer

How do I program a Legrand 04761 timer?


Generally, the instructions are shown below: you will have to fiddle around to tweak the instructions since this model Legrand is discontinued, and replaced with the 412641
There are 4 programming buttons located on face of timer: menu, on, +, -
Press menu, use +- to scroll down to GCFEIL, Press on, select language
Press menu, use +- to scroll down to set, press on, set current time and date using same basic commands.
Press menu, use +- to scroll down to program, press on, select new, press on, select day-days of operation for program 1, select individual, set On and OFF times for program 1, save
Press menu, use +- to scroll to function, select auto to run programs.
http://waterheatertimer.org/pdf/legrand-412641-D22-manual.pdf
http://waterheatertimer.org/Din-rail-timers-and-manuals.html

Gene


Water Heater Timers Save Money

Mar 02, 2015 | Legrand Hardware & Accessories

1 Answer

Black screen in jump start


Go to the Properties of the shortcut, choose Compatibility tab, and place a check in the option to run the program in 640x480 resolution.

Feb 08, 2014 | Jump Start JumpStart 3D Virtual World...

2 Answers

No sounds device


Hello emedianannab, You have to "Update the Drivers" or you will have other problems with "Hardware" too.
Part1

Do a [Microsoft Update] from the "Start Menu," paul7of9_86.jpg scroll in the "All Programs."
Do a "Windows Update" Type: windows update, in the Start Search {box}.
Go to the "Control Panel" from the Start Menu," open the Control Panel,
scroll to find "Hardware and Sound," and click on the "Sound" applet.
Open the Speakers Properties, click on the [Driver Button] and "Update Drivers for the Speakers"


Part 2

From the "Desktop Screen." paul7of9_81.jpg


  • [Right / Alt] click on the Volume Icon. paul7of9_82.jpg
  • Once the 'window' open!
  • Select the "Playback Device" shortcut.
  • Next, {2x click} to open the [Speaker Properties] 'window.'
  • Now, check the (Device Usage) to make sure that it is [Enable].
  • Next, check the "Levels / Enhancements" by clicking on the buttons...
  • Make sure "that all the levels on the 'Sound are up!
  • Next, go to the "Drivers" by clicking on the "Properties" button.
  • Select the [Driver] button, and "Update the Drivers.
  • ***Note: "If any of the Driver {Areas} are "Grayed-Out," than this mean that the "Drivers are up to (Date)." Click on the "OK" button when finished!
  • Next, "Restart the Computer."

If this information helped? Return and give a "Helpful Rating," please!
Thanks, paul7of9

Feb 24, 2011 | Computers & Internet

1 Answer

Have a green rectangle about 2 inches by 5 inches in center of screen with yellow letters that say, input signal mout of range. It is A hanns g hg281d monitor


Restart your computer,
and keep hitting the F8 key until a "start-up" menu
(white text over a black background) is displayed.
Choose "Safe Mode" and let Windows start.
Reset the screen-resolution to 800-by-600, and 60 Hertz refresh-rate.
Restart your computer, normally,
and then "tweak" the screen-resolution and refresh-rates that are "optimal" for your monitor.

Aug 09, 2010 | Computers & Internet

1 Answer

I have a Hitachi model 50V69A and have large yellowish spots on screen. It is most noticeable when watching programs with light background, like hockey games..


I havw a simialr problem mine is a blue stripe toward the center of the screen. The problem is most likely from the blue lens on mine or the yellow on yours. I was able to adjust it out somewhat and I am still tweaking it by using a setting in the technical menu called stripe.

You can access the technical menu by pressing the fowllowing on your remote:

MENU +MENU+ 8 + SELECT

Hope this helps

Jul 02, 2009 | Hitachi Televison & Video

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101466 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...