Question about Denon Audio & Video Receivers

1 Answer

I have a Denon 300f that works fine but run a bit fast so the music sounds really off...anything I can do to slow it down?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was putting the belt around the wrong part...it needed to go on the bottom of the turntable itself then be attached to the belt drive.

Posted on Jul 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Denon AVR 1905 is hooked up with surround sound to a new LED Samsung 6200 series. The picture is fine / the sound is fine but the lip sych is not. Is there any way to fix this??.I have had a technician...


You need to see if the TV's sound, not the receiver is out of sync also. Turn up the sound on the tv and turn down on receiver. If it syncs correctly, your receiver isn't fast enough to process both correctly. You will have to upgrade your receiver to one that supports HDMI 1.4. Samsung sells one that works great, model # <span class="Apple-style-span" style="font-family: 'Lucida Grande'; font-size: 12px; ">HW-C500. </span>

Aug 05, 2010 | Denon AVR-1905 Receiver

2 Answers

Denon avr-3200


Check a few things first to narrow this down a bit. Disable the surround processing. If this clears up that channel, then the problem is in the processing area. If the static remains, vary the volume. Does the static change volume too? If so, then the problem is in the beginning stages of the pre-amp section and is likely a transistor or two breaking down. The parts for this would be in the $5 range. This would probably be considered a "major' repair becaue of the time required to hunt down the defective part.

Dan

Mar 28, 2010 | Denon AVR-3200 Receiver

1 Answer

My very old Denon AV Receiver (DRA-55V) works fine except that one of the channels sounds 'gated' or thuddy and staticy...music is heard (in all sets of speakers and headphones) but quality in one channel...


check your speaker A - B channel push-button switchces. They tend to get worn and contacts internally corroded after all these years <!-- from fixya rte -->

Feb 21, 2010 | Denon AVR-587

1 Answer

No audio running TV through Denon AVR 1910


I had the same problem. You're not doing anything wrong. the thing is you can't (I don't know why but the owner manual says it) have sound going to your tv AND your HT speakers when you're using HDMI. You should try going to input setup, choose hdmi audio out to your TV instead of the speakers, and then run an optical cable from your satellite to your receiver, assigning it to the TV/Cable input.

Aug 28, 2009 | Denon AVR588 Receiver

2 Answers

Crackling sound from denon avr 2106


I think you may have a blown speaker.

Sha'ul

Jun 25, 2009 | Denon AVR-2106 Receiver

1 Answer

Can't get clear sound when not in "bypass" mode on Denon Pro Logi


From the FM radio mode, from your remote press the speaker button to make sure just the front speakers are on, make sure surround is off and use the tone cotrol button on the right side of the amp to adjust the bass and treble. That should clear things up a bit

Feb 25, 2009 | Denon AVR-2802

1 Answer

No surround sound from my Denon 3805


well as long as all signals are routed through the Denon your on the right track, now what else you have to do is connect all devices to the reciever do not loop one device through another. Also you have to try the different surround fields to hear the one you like the best for music I use 5Ch stereo for movies the surround field varies based on the type of movie

Feb 01, 2009 | Denon AVR-3805 Receiver

1 Answer

I think my amp is broken


Finals/outputs are toast. Get it serviced to get back to sweet music...accordianman

Feb 21, 2008 | Denon AVR-2807 Receiver

3 Answers

Receiver shut down only when using phono preamp


You may want to try putting an attenuater in the line with the RCA's to cut the input signal back just a little bit. So you are not driving the amp so hard with your preamp.

Sep 08, 2006 | Denon AVR-2803 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...