Question about Alpine Car Speakers & Subwoofers

1 Answer

I have a '03 BMW 325CI with an Alpine 6 disc changer in the trunk. It is model # 82 11 1 469 404, with a manufacturer date of 2000.AP.April . It was working fine until one day I told the head unit to change discs. All of the sudden the head unit said "No Disc". There are 6 CD's in the changer right now. When you turn the car on, or try to select the changer on the head unit, or eject the cd cartridge nothing happens. The unit seems to be getting no power or signal or something. Please help with any suggestions you might have. Thanks David davidgm3@gmail.com

Posted by on

  • davidgm3 Jul 20, 2008

    Take it to a dealer? Do you think I am a moron who did not think of taking it to the dealer? I thought the point of this site was to help people fix the problems on their own. Thanks for insulting me.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Take it to a BMW dealer and ask them to take a look at it.

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an alpine 6 cd changer in the trunk of my BMW. The magazine won't eject. I can hear it trying but it wont come out. A cd is half in and half out of it's carrier and I can't get it to go either way...


hi the best way to do this is, remove the changer from the trunk and once out, hold it face up so you are looking at the loader door, then turn it anti clockwise so you are now looking at the side then give it a few gentle but quick shakes, then plug power back in and see if it releases it, if not just keep doing it till it does...hope this helps

Sep 27, 2010 | Car Speakers & Subwoofers

1 Answer

When i change from radio or single disc to the 6 disc changer there is an error it won't read any discs.... It wont even change discs it won't do anything really...


I suspect that your 6 cd changer is having the fault. The error indicates always a system malfunctioning. From our point of view we can probe into for a solution by the following guidelines.
first of all open the 6 Cd changer from the top. look within to find that the changer is jammed inside. If so slowly tapp while you switch on the power. if the jamm clears and the changer ejects, then open out all the cd's present in the changer for any damage due to heat. If this did not solve, clowing chek for foreign particles/dust that has blocked the loading drive.from completing the cycle so as to reset the mode. normally all errors show because of the processor not receiving the complete cycle signals. hence check for all the moving parts, the drives and the loading mechanism. check also for any linkage damge, any leadd specially flexible line wiring to the motors for an open circuit. Slowly turn the motor drive to intiate to confirm if the motor has failed. Altogether use a multimeter and check in all the sections described.
I hope this helps. Good day.

Jun 28, 2010 | Car Speakers & Subwoofers

1 Answer

I have an old alpine 1310 car stereo cd changer & forgot the code


I have an old alpine 1310 car stereo cd changer & forgot the code

Aug 20, 2008 | Alpine Car Speakers & Subwoofers

1 Answer

WHEN YOU PLACE A CD IN THE CD CHANGE IN MY 2000 LEXUS GS300 IT SHUFFLES THE CD AROUND THEN DISPLAYS WHICH NUMBER THE DISC IS IN BUT IT WILL NOT PLAY OR DO ANYTHING. SHOULD I BUY A NEW CD CHANGER? OR COULD...


if its a burned cd, check to see if its CD+/-R or CD+/-RW.
some older model cd changers dont play cdrw's.

if its a store bought cd, have the changer looked at by an electronics specialist.

Aug 14, 2008 | Car Speakers & Subwoofers

1 Answer

How to use a Pioneer CX-P680 6 Disc Changer


Press The eject button on the disc changer and the cartridge should pop out of the disc changer insert cds in the cartridge and pop back into disc changer

Jun 18, 2008 | Car Speakers & Subwoofers

1 Answer

Error 1 on alpine cha-s364


Quick Note: It's really helpful to your cause if you make sure you include more information about your system and what you're doing to get an error.

It's also a good idea to make sure you type in your model number correctly - you've typed in cha-s364 (the actual model you're talking about "I think" is a CHA-S634 - please verify!!

Here's a link to the user manual

As for the E-01 Error message on your CD Changer:

The E-01 reading is an error message, usually because the changer magazine is jammed in the changer. To manual eject out the magazine, take a thin plastic ruler (at least 5-1/2" in length) and slip it between the bottom of the magazine and the changer. Now, push in. This will hit a release button in the back. If the magazine does not eject, you will need to send the unit in to be serviced. To locate the nearest authorized service center to you call 1-800-ALPINE-1.
Note: if the magazine is half way out, but jammed, DO NOT try to release the magazine. You will need to send the unit in to be serviced by a technician.

May 29, 2008 | Alpine Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Speakers & Subwoofers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Alpine Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...