Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

3 Answers

How to get a third computer to work on my wireless network

I have set up a wireless home network so that my wife and daughter can use the internet, im a real novice at computers, but iv seemed to have my wifes up and running. My daughters i am having real problems with.I cannot get it connected,on her computer the wireless adapter is working fine, but it keeps coming up with not connected,cannot find server. Im i missing something i dont want to mess around to much incase i knock all the settings and end up worse than iam now Hi.
I've been using wireless internet on my lap top without a problem, until we connected another desktop to the wiireless system. My laptop now will not connect at all (cannot find server), even though it says i am connected with excellent signal. It worked for about an hour, and hasn't worked since (over a week).
Tried rebooting a lot, and 'pinging'.
4 sent, 4 lost.
Any thoughts..thanks.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 230 Answers

Better use seperate wireless network for the desktop .

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 497 Answers

Do check up with ur wireless provider too...and be sure it is security enabled..and also be sure that the wireless adaptor is turned on...maybe there is problem with the button and also check network settings..
all the best
keep us updated

Thanks for using Fixya

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Belkin Master
  • 19,396 Answers

Buy a wireless USB card and join the desktop to the network

Posted on Jul 17, 2008

  • Ginko
    Ginko Jul 17, 2008

    Check first that your laptop is connecting to your own network, and not by mistake, to some neighbor's network.
    To do this click on show wireless networks available using the wireless option (usually you can start it from a small icon near to the clock.
    If it is not working fastest way to proceed is removing the network card from installed devices in control panel and installing it back.
    This will solve driver problems and reset network settings.
    You will need to enter the network key again after doing this.
    Ensure you know you network encryption key unless you are using an unprotected network (no key).


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My daughter is home from college. Her computer can't connect to our homes wireless. It recognizes that the wireless is there, but can't or won't connect.


What does it do when you try and connect? Does it ask you for the key? Is your wireless network have security set up on it or is it an open network?
Thank you,
Lee

Apr 24, 2011 | Linksys WRT120N Router

1 Answer

I have a windows xp laptop computer that is not very new. I bought a netgear router and hooked it up to my desktop computer and was able to get wi-fi for my daughter on her i-pod. Now I am trying to get...


Pretty simple. It should be set to auto discovery. As long as the WiFi is working ie switched on you shoyuld find your home network pretty easiily. You do need ot knwo the SSID (the name of the network adn teh pasword. Right click on the wireless icon in teh tray to the bottom right adn show the list of netwoprk sits found. One of those should be yours. Simply 'connect' to the network adn entire the Passphrasethat was preassigned when you set up the network an it should automagically connect.

Jan 13, 2011 | NetGear WGR614 Wireless Router

1 Answer

Hi I have just installed a brand new Belkin wireless router and it works great with all computers and laptops in the family (including Apple products) apart from my daughters laptop...she has a toshiba...


Check the main computer you set up the network router with...you may need to go to the network status and tasks in control panel...click on this...then you will see a map of all the network devices connected...find the belkin router and click on it...in this window there should be a tab called wireless properties..click this...the wireless properties first page should have the wireless SSID name listed here...and if you click the security tab then the security type and network key are displayed here..You need to write down the SSID, security type, and network key and make sdure the toshiba laptop setting for the wireless network are exactly the same. There may be a link on the first page of the wireless securities saying copy to usb drive..you can use this to copy all network settings to and then transfer these settings in to the toshiba by using the network setup wizard.

Jan 04, 2011 | Belkin (F5D8231-4) Wireless Router...

1 Answer

Im a new compaq presario cq60 owner- im trying to setup wireless network at home-att.is my only option in my area- have a 2wire 2701hg-b wireless router and cant get it to work internet,wireless only with...


You will need to check the wireless settings of the router.
You said that it works only with the ethernet connection but not with the wireless connection.
Check the IP address of the computer when it is connected with the cable to the router. note down the default gateway number.
Open the set up interface of your router with the Default gateway number.
once you are able to open the set up interface of your router, you will be able to change the wireless settings of the router.
after that you will need to conncet to the wireless network on your laptop.

Click Here for more Information

Oct 06, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Unable to send emails but able to surf internet.


you have to set up where outlook is sending the mail IE: pop3, or stmp @ whatever your internet provider is

Jul 12, 2009 | D-Link DIR-625 (790069292637) Wireless...

3 Answers

Unable to get wireless connection at a new location


Hi...

Verizon uses PPOE(point to point protocol over ethernet) and Comast does not use PPOE. Therefore she needs to get inside the router 168.192.1.1(user:admin & pdw: admin) to disable the "PPOE". Oh and also, the router needs to be hard wired to the computer for reconfiguration to take place...hope this helps

May 18, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Can't connect new laptop to internet through wireless


Hi...if you mean the network key, the key Windows asks for when you try to connect to a secured network, you can find this within your router settings.
As this is a 2wire model, you might also find it on a label on the router - it depends if you changed the default settings.

Please visit this page for help:
http://support.2wire.com/?page=view&article=60

- it will show you where the default network key is on the label, or if you have changed it, how to login to your router and to find it in your settings (see screenshot at base of page - your network key will just be labelled 'key'.....)

f197e28.gif

Jan 27, 2009 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

Router disconnection


1. Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
2. You will get a login page. Leave the password blank. Click Submit .
3. On the left side of the page, click Channel and SSID below Wireless .
4. The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel like 11. Click Apply Changes .
5. Click Logout in the top right hand corner.
6.Then reconnect to your wireless network.

May 17, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

How to get a third computer to work on my wireless network


is the adapter connected to the router? are you using wep? is the firewall disabled?

Nov 11, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...