My canon SD 750 is not turning on eventhough the batterly is fully charged. i can't recall dropping it!! Someone said that they have a fuse but i'm not sure if a camera this small has one. What do you think the problem is?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure battery is fully charged. Remove any SD card - does it still do this? If not, it may be defective card, or it may be a bad SD circuit board. Try another card. If it deos the same with another card, replace SD circuit and re-test.
This assumes camera has not been impacted, dropped, water damaged, etc.
I have to say that you are probably using the wrong SD card. Or the memory card is to big and the camera cant handle all that memory space. I recomend that you try a 512mb San Disk SD Card. Dont mistake this for any card. Dont use a San Disk SDHC card. Do this and make sure your batteries are charged and you should of solved your problem. Good-Luck.
You may have a more serious problem that will require professional repair, but the problem that you describe is frequently battery related. Make sure
you have the correct battery type installed, and that the batteries are
fresh/fully charged. If the problem persists, you may have corrosion
on the battery contacts inside that camera that is preventing full
battery power from flowing to the camera. Remove the batteries and
wipe the inside camera contacts firmly with a dry cloth (heavy
corrosion may require cleaning with a wire brush, steel wool, or sand
paper). Remove any residue that may have fallen into the battery
compartment during cleaning, then wipe both ends of the batteries and
reinstall them in the camera. This cleaning solves the problem about
90% of the time, and I hope it works for you.
Did you accidentally press the DISP button on the back of your camera? This manually turns the screen on and off to save batteries. Try pressing this button one more time to see if it turns the screen back on.
I HAVE LOCATED THREE REPAIR SHOPS THAT WORK ON CANON AND GIVE FREE QUOTES. I DO NOT ENDORSE ANY OF THESE, BUT PASS THEM ON FOR YOUR INFORMATION. AS FAR AS I KNOW THEY ARE RESPONSIBLE. THE WEBSITES ARE BELOW. I HOPE THIS HELPS! GOOD LUCK! IF YOU NEED ADDITIONAL HELP,REPLY TO:ARCLIGHT1217
Hey kirby18, I would try cleaning the battery contacts with alcohol and cotton swabs, and if this doesn't work you can try replacing the battery with a new battery. If neither of those options work I would suggest having the camera looked at by an authorized service technician. Sincerely, Allan Go Ahead. Use Us.