Question about GE 25931 Trio Cordless Phone

2 Answers

Cant get one of the phone to get dial tone says unavalibel

Cant get one of the three phone to get dial tone only the main base one.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

All you have to do is put the phone that does not get a dial tone on the MAIN CHARGING BASE for 20 seconds! it will then sync up!

Good luck!

Posted on Oct 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I removed the green batteries from the handset and replaced them with new AAA's,placed handset on base,when removed got a dial tone. Replaced 3 batteries with new rechargeable batteries, problem solved.

Posted on Sep 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get a dial tone on AEG Chamfer 215-2?


If it was a lightning strike and had a power surge that toasted it you could contact your utility company about a claim.

Oct 28, 2014 | Lands Phones

1 Answer

No dial tone cant make calls


No dial tone and inability to receive ring signals are symptoms of connection problems. The installation instructions should indicate how your telephone system should be connected to the network.

Dec 30, 2013 | Lands Phones

1 Answer

Phone not working


Hi Pam,
Try these..1...remove your telephone line from base unit and fix it into a working land phone and check whether is it having normal dial tone.If it's having engage tone(beep beep...)remove paralleled phones and re connect to cordless base unit.
2.If line is ok (normal dial tone with full volume) & still display indicates line is busy, your main base unit must be having faulty components inside.Commonly these defects happen in thundering or surges through telephone lines.You have to take full set to a repair shop.
Rana.

Dec 28, 2013 | Gigaset As300 Twin Dect Cordless Phone -...

1 Answer

My phone doesn't have dial tone. Each time I dial a number and try to call,it wont work. I call my phone but it wont ring. I need help on this. What happen to the phone? Or what should I do?


If you have another phone connect it to the wall outlet to see if you get a dial tone. This will indicate if your base unit is faulty.
Check the power adapter to the base unit, make sure it is getting mains power.
If the base unit has dual phone lines and if line 1 is only connected and the line 2 has beed selected then you cannot get a dial tone. In the chase press the line 1 to get a dial tone.
If your base unit has only one line then check the phone line at the wall socket make sure it is plugged in tight, also check the the connection at the base unit.
If this does not work then ring the phone company and get the to test your phone line, you may have a faulty line to your home.

Feb 03, 2012 | AT&T E2116 2.4 GHz Cordless Phone

1 Answer

No dial tone cant recieve calls


The main base controls the phones, exchange the phone cord from the wall to the base, failing that! unplug the phone cord and power from the wall outlet, allow at least 30 minutes to see if the processor will reset, failing that! it is cheaper to replace your phone system rather than have it repaired.

Jan 05, 2011 | Uniden 5.8GHz Cordless Phone

1 Answer

No dial tone in Clarity C4230 setup


if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Apr 16, 2009 | Clarity C4230 Cordless Phone

1 Answer

Problems with handsets


Are they cordless phones?If they are they get there dial tone from the base.If there is a blinking red light on the hand sets they lost communication with the base.Check your user manual to see if you need to program them to the base.

tk46

Jun 09, 2008 | Panasonic KX-TG1033S Cordless Phone

2 Answers

STILL SAYS "PLEASE REGISTER"


I think this may be the answer. With multiple handsets reading "Please register" and a "working" base station (w ith dial tone). If you bring the remote units to the base station and place them on hte base, they will register and stay registered after you return them to the remote base. It doesn't say this anywhere in the instructions as it gives you the impression the remotes will register from their own base.

Jan 04, 2008 | GE 25932 Cordless Phone

2 Answers

GE - 25951EE1


If it is on an additional phone base (not the main), put the phone back on the main base for less than a minute.

May 01, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
GE 25931 Trio Cordless Phone Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

98816 Answers

Cindy Wells

Level 3 Expert

4805 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...