My printer photosmart 8250 is printing does not print it says ink system failure when i try to replace it the yellow ink jet so please please help i'm in third world country my email address is firstname.lastname@example.org please help again
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Although the support page of the following link is titled: 'Carriage Jam' this article (with pictures) shows the reader exactly what to look for when the Print Cartridge Cradle becomes stuck. Click here: http://bit.ly/dpui4S
Set the default printer driver settings to print 10 x 15 cm (4 x 6 inch) photos
Make sure 10 x 15 cm (4 x 6 inch) photo paper is loaded into the photo tray.
The Photo Tray light on the printer does not have to be lit when printing from a computer.
Click Start and then click Control Panel .
Click Printers and Faxes .
Right-click the icon for the HP Photosmart 8200 Series and select Printing Preferences .
On the Paper/Quality tab, select 4x6 or 4x6 with tab from the Size is drop-down menu (under Paper Options).
Make sure that the Source is box is set to Photo tray .
Click the Borderless Printing box if borderless prints are desired.
Click Apply and then click OK .
Open the software program you wish to use and set up the pictures you want to print. Make sure to select a 4x6 inch layout for the photos within the software program before you print from the software program.
Make sure printer is connected to computer.
Go to Start ,Control Panel ,Printers and make sure it does not say offline.
If it does right click it and select the option online.
If it does not then remove it and reboot the system.
Used HP's chat, they helped walk me through it. NO CHARGE! You push the 'on' button for 45 seconds after you disconnect all the cables. Plug in the power cable only. Then print a test page. If that works, plug in the USB. Should fix the problem. I'd recommend working with HP, as they can check the internals on your machine while you chat with them.