Question about HP PSC 2410 All-In-One InkJet Printer

3 Answers

Printer not booting up after power lose.

Power was lost during a storm a few days ago and ever since, the printer has not finished booting up (powering up) Well, I call it booting because on the screen is the hour glass which in times past has gone away and then finish powering up. right now, the power light is flashing and the hour glass is still there on the screen that has the HP logo. What can I do if anything?

Larry

Posted by on

  • 7 more comments 
  • steffan925 Jul 19, 2008

    I have the same problem, power outage (not due to a storm) and at first it just kept making the noise like when the printer is printing, but the print head never moved. The hourglass stays on the screen the on button is flashing and nothing works. I have unplugged, rebooted, and it won't work

  • markhandball Jul 20, 2008

    hp psc 2410 will not reset. Screen will not move past hourglass timer.

  • kensterfly Jul 25, 2008

    I, too, had power outages today. Ever since all I get the hour glass on the screen with the HP logo for about ten seconds, then black for five, then back to the hour glass. A very small, dull click is also going on. The printer cartriges do not slide to center when I open the front. I have rebooted several times, as well as reinstalled software and hooked it up to another computer. Nothing works. I hope someone can offer a suggestion.

  • cpingry Jul 25, 2008

    I have the same problem. I've unplugged the printer and disconnected it from the computer and left it overnight. When I plug it back in, I get the hour-glass and the clicking noise.



    cfp

  • guyton Jul 29, 2008

    wont boot up after storm just clicks

  • Anonymous Aug 03, 2008

    Printer just will not print, says that the Printer is stalled.

  • pas66 Aug 11, 2008

    After every storm that we loose power, my printer buggers up, too. I get the screen with the HP logo and the hourglass when power comes back. I unplug the printer from the back, wait about 30 seconds and plug it back in. It sounds like it's going through the restart stuff. The ink cartridges do their thing fine. It's the light/lens bar under the glass that messes up. It comes out from the right a couple of inches then moves back to the right and gets stuck making a "bump-bump" noise. I tried chatting with HP. They said it was a hardware malfunction and I could trade it in towards a newer machine at a discounted price. I know I've pressed something in the past that helped it reset but don't remember what. What you guys think?

    Thanks! :o)


  • dezro364 Aug 15, 2008

    same problem, still not working, plz help

  • comp expert Dec 22, 2008

    how do you restart a hp psc 2410 photosmart all-in-one after a power outage i tried everything. i unplugged it for 2mins and i even turned it off AND on while holding cancel all i get is grinding for a minute and then it stays at the stupid load up screen. i feel like giving up and im a smart at computers.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem on my 2410. Tried guest`s suggestion of moving power plug from strip to dedicated wall socket and it worked first time. Thanks FixYa !

Posted on Jan 08, 2009

Oops, here is the thread:
http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1217095878167+28353475&threadId=942296

Posted on Jul 26, 2008

Hi guys. I had the same problem, but looked at this thread. I guess mine was related to the power, because when I moved my plug from a power strip to a wall outlet, it worked fine.

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to the microwave, after storm.


The low voltage brownout let the oven draw too much current, and likely an internal fuse failed. Typically after removing a dozen Philips screws you can take off the cover and locate the fuse, which you can match and replace. [If it still has "power" (like the lights come on) but has stopped heating, then it could be any number of other issues (main capacitor fail, etc)] I've changed a fuse or two in my day, and years ago a failed capacitor, with success.

Jan 13, 2014 | GE Microwave Ovens

1 Answer

I have a AT@T Model No. E5908, 5.8GHz Corded/Cordless Telephone/Answering System that has always worked perfectly until a bad lightning storm hit a couple of days ago which caused the power to go off. The...


I hate to be the bearer of bad news, but there is no reset on the phone system, and it's a near certainty that a power surge during the storm "fried" the sensitive circuitry in your phone. The same thing happened to me a couple of years ago and I ended up replacing my phone system. A corded phone in the house at the same time lost its ringer during our storm. To this day it still works fine, but will not ring. While you cannot save your present equipment, it's possible to protect your replacement by installing a phone line surge protector (available at just about any store that sells phones or computers) and a whole house surge protector that you install at the main outside breaker box (you'll need to search the web for that one. Look for a SYCOM surge protector).

Mar 30, 2011 | AT&T Lands Phones

1 Answer

Helo,after power outage,our printers doesnt work.It sad offline.Do you now we can fix them.We turn it of and turn on,but it doesnt work.Maybe we must install it again.


try this open your printer folder right click on the printer and make sure that the use printer off line is not checked. i have seen this be the case when ive lost power.
if these took a power surge during a storm the nvram chips are probably shot and your network pcb's will need to be replaced

Jun 14, 2010 | HP LaserJet P2015 Printer

1 Answer

R1800 Won't Power Up


Just check the power cord of your printer it maybe don't have any lost connection or change the power cord. If did not work also their was a problem of your powersupply. You need to bring it to the electronic center technician for the proper repair of the power supply.

May 26, 2010 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

After power outage the printer won't power up.


The printer is dead, the surge got thru and fried it. Replace it and the surge-protector.

May 08, 2010 | Dell 922 All-In-One InkJet Printer

1 Answer

The printer will not power up. Everything is


If no power, try to check the plug fuse first.

Sep 09, 2009 | HP PSC 2110 Color Printer

1 Answer

Cartridges do not Move & the Printer Shut Downs Automatically


tell if the cartridge iss moving a litle or is totaly bloched

Sep 06, 2009 | Canon Pixma iP6210D InkJet Photo Printer

1 Answer

Printer does not power up


No fuses on the 830, Take out the printhead and see if it powers up, if not the main logic board has gone out.

Jul 22, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

No sound


Did you have storms go through your area and lightning strikes or power surges? We did a few weeks ago and I have very raspy sound but perfect picture...

Mar 04, 2008 | Sony DAV-S300 System

2 Answers

Tv will not turn on after lightning storm


Defective HV transformer. (Likely lost it during the storm)...accordianman

Nov 28, 2007 | Orion TVDVD092 9 in. TV/DVD Combo

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...