Tv/dvd when you put the dvd in it says loading then it ejects it

If you are not sure about trying any of this Get a TV specialist to look at the TV.
Some DVD players are fitted with an emergency release. Look carefully at the area around where the DVD slots into the player for a small round hole. If there is a hole there you can use a paper clip to eject the Disc.
Try this... Bend one end of the paper clip outwards. GENTLY push the bent out end into the round hole. It won't go in very far, This should eject the DVD.
If there is no hole it gets more difficult.
**DO NOT put anything metal in the slot! Household voltages can and will Kill you!**
Try this... Find a CD or a DVD you don't need anymore as you will scratch it doing this. Grip your spare disc firmly and start to Gently slide it into the DVD slot. When it gets to the position where it starts to grips and load the disc, Firmly pull the disc back out of the player.
This should trigger the load/eject motor. Because you pulled the spare disc out it should create a load error and it should eject the DVD that is already inside the player.
If this doesn't work Get a TV specialist to fix it for you.

https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=proscan+TV.+I+put+a+DVD+in+and+now+I+cannot+get+the+DVD+to+eject. .see if this link helps you out

If the loading belt is broken the CD inside will not eject. If the loading motor is defective, the CD mechanism won't eject. Anyway, the CD loading mechanism is defective. http://electronicshelponline.blogspot.com/

Disc loading mechanism fault. Contact any service technician. The mechanism should take out from the TV; either for repair, or replacement. If you wish to get some details; check the site linked here. Pull up older posts.Surf the site with patience.http://electronicshelponline.blogspot.com/

Disc loading mechanism fault. Disc is not loading properly to its seating. Contact any service technician.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

DVD loading mechanism fault. Disc do not loads well inside it, and so it ejects. Replace the loading mechanism. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Hold you had over the tray and don't let it eject. If it accepts it and loads you'll probably have to do that every time. If not...it's shot.

bad unit replace

Open up the unit find the load and unload motor on the DVD carriage and turn it manually and this should eject the tray. You may even have to unscrew the carriage to get to the bottom of it to access the load and unload motor.

This is going to require opening the unit and taking the DVD unit covers off. If you feel confident and are good with tools and have a good memory (to remember how it all goes back together), you should be able to get the DVDs out. Just remember to be careful inside the unit, go slow and don't force anything. After the DVDs are out and you have the unit back together properly it should be OK if no damage was done to the laser assembly. Good luck.