Question about OKI MICROLINE ML-395 Matrix Printer

1 Answer

Alarm light flashing

I have an okidata microline 395 its our stores main printer well this afternoon i went to relaod a bo xof paper on it and the alarm light kept flashing so i cleaned it out removed all the paper and stuff from it and reloaded the paper but the alarm light just flashes the lights that are on, on the front panel are ORA, NLQ, 10, 20, Prop. personally i think that the print head may be bad but my boss told me to post it on here first.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Hi,
Is the front cover on the printer(ifs its not the alarm light will keep flashing as there is a sensor that will trigger the alarm if the cover is not on or not on properly.Hope this helps?
Dezzi

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello , i have a okidata microline 393c ,its happens that


Could you look in the manual and see what that alarm is for? It has been a while since I have seen a microline printer. Mostly businesses still use that kind of printer.
Id say the ribbon might be out.

Mar 09, 2010 | Office Equipment & Supplies

1 Answer

JUST BOUGHT A OKIDATA 321 TURBO 9 PIN PRINTER OFF EBAY. WE HAD ONE BEFORE & IT QUIT WORKING SO WE ASSUMED WE COULD JUST PLUG THIS ONE IN & IT WOULD START WORKING BUT THE ALARM BUTTON KEEPS COMING...


If the alarm light is lit constantly it usually indicates that the paper is not loaded, it should go out when paper is loaded. If it is coming on and staying on for a while during printing then there is a problem with the paper out sensor and it may need cleaning. If it is flashing then the other lights that are lit indicate the problem.

Nov 18, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

I have oki microline 320 elite and printer head jams


In my own experience, Okidata printers have a nasty habit of collecting a lot of paper dust. To start out, I would suggest a really good cleaning, with no paper in the machine, with a can of compressed air. If that does not solve your problem, you might have to replace your feed wheel assembly. Hope this helps!

Nov 09, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Cannot reset after paperjam - alarm light will not go off


Sounds like the paper sensor actuator is stuck try blowing it out under the platten with some canned air or a air compressor.

Oct 09, 2009 | OKI MICROLINE 395 Matrix Printer

1 Answer

Okidata microline 320- having menu problems


Menu Light flashing is a printhead thermister overheat problem.
Power off the printer and try reseating the print head; if this fails you'll need to replace the print head!

Nov 21, 2008 | Matrix Okidata Microline 320 Printer

1 Answer

Alarm light on permanently


make sure all compartments are closed
make feed doesnt have a stuck page in it
sometimes if the compartments arent closed right or by some chance the ink cartridge was bumped this will sound the alarm

May 22, 2008 | OKI MICROLINE ML-395 Matrix Printer

1 Answer

Okidata Microline 395 all lights blinking


You may have a blown logic board.
Hope this helps.
Dezzi

Mar 03, 2008 | OKI MICROLINE 395 Matrix Printer

1 Answer

Printer not printing the top of the characters


Yes quite possible pin broke on head, check ribbon is fitted correctly and has plastic sheild on front of it intact

Jan 18, 2008 | OKI MICROLINE ML-395 Matrix Printer

2 Answers

Okidata 395ML


Hi ,
make sure the cables to the main logic board are plugged into the correct places???
Dezzi

Jan 09, 2008 | OKI MICROLINE ML-395 Matrix Printer

3 Answers

Problem with OKI ML 395


the lid has 2 small points the holds down 2 censors that indicate when it is off, make sure that there are not broken and that the censors are being engaged.

Oct 31, 2007 | OKI MICROLINE ML-395 Matrix Printer

Not finding what you are looking for?
OKI MICROLINE  ML-395 Matrix Printer Logo

2,302 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...