This morning my TV was working fine, but when I came home this afternoon to turn it on the screen showed green with lines running through it. The sound was running fine and you could vaguely see the TV show in the background. The other TV upstairs worked fine, so I am guessing the problem is with the TV.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The foldover is because of a bad capacitor in the vertical circuit. Given the "new" sympotom of a dead set, I would suspect that the vertical IC has failed. This should be a relatively simple repair for a TV shop. If you wish to attempt a repair of this yourself, update this and confirm your model number and I'll post more details and instructions.
My Dad had a Hitachi rear projection with same problem blue and red were fine green was out of allignment and could not fix. Problem was the acual projector inside TV the cost for repair was more than TV was worth went out bought plasma.
Green Screen with some lines
lines are called retrace lines.
it is due to
maybe dry soldered or no green drive signal. This problem can be fixed by complete soldering in crt board.
1 green video supply absent
2 loose contact in green skt in crt board
3 crt board loose
4 no green drive signal.
If your tv has a picture tube,your problem is in it.
If you have only one line now,the vertical circuit is not working.
You could have jarred something loose around the picture tube.Maybe a yoke lead ???