Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore Top Loader Washing Machine

HI!

My washer, mentioned above has stopped working. It filled up with a normal sized load and just stopped working. The unit is getting power, however nothing is occuring. I moved the clothes around thinking maybe it was off balance and tried to restart...nothing.

The MOD # is 11024632300 and the serial # is CR3872120.

I cannot get the water to drain, no power seems to be getting to it and the unit is less than three years old. ANY help you could provide would be appreciated!

Posted by on

  • mrocks Jul 22, 2008

    I have a similar problem with my washer. I put in a load of clothes and went on to do other chores. When I came back, it had only filled up with water, wouldn't agitate, spin or drain. I checked the cycle switch, the door switch, and nothing. I've checked the fuse box, and finally ended up taking all clothing out and checked to see if drain hose was clogged. It was clear.

    Other than that, I haven't tried anything else unless I had some documentation on it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 172 Answers

Check to make sure the lid switch is closing when you close the lid. When you open and close the lid you should here a click similar to a wall light switch.

Also check the lid to make sure the tab has not broken off that actuates the lid switch, your model may not have a tab on the lid.

ask more questions is lid switch is functioning,

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Kenmore top load washing machine and it is dripping water inside. Do i need to replace a valve or a gasket?


Until you find out why it is dripping turn off the water behind the washer. Then I would go and search online typing in the browser search "Kenmore top load washing machine model no _____ leaking - what is causing this?" and hit enter. You will get lots of leads. I did a quick search just on Kenmore top load washer leaking and found this video.


Hope it helps.

Tami

Mar 03, 2015 | Kenmore Washing Machines

1 Answer

My Kenmore 500 top loading washing machine wont work right. sometimes it will work and other times it wont. I will put a load in it and sometimes when it hits the rinse cycle it seems like it gets stuck...


for the top loading washing machine mostly have drain pump, please check the filter of your drain pump, if clog your drain pump of some hair pins,cotton buds or coins or any small item,that the cause of water stuck,and it will long time draining or totally not running the drain pump.and its cause of stop of cycle of washing machine in rinse time or spin time,because after washing the pump must be on to remove water before start the next cycle.and the unit top load have drain pump you must be up the drain hose up to 90cm from floor lever to make the water lever is make in normal,the water automatically goes out by drain pump.
and for unbalance most of all top loader have problem in unbalance, the main reason is overload or the type of cloth you wash.

Nov 02, 2013 | Kenmore 24032\24036 Top Load Washer

1 Answer

Front loader won't spin and is filled up with water. Won't drain.


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

May 15, 2011 | Kenmore Energy Star 44092 Front Load...

1 Answer

The cold water cycle is not working on my Roper washer top loader heavy duty



Hi,

If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

May 12, 2011 | Roper RAX4232KQ Top Load Washer

3 Answers

My new electrolux front loader is not filling with water during the wash cycle. The clothes are soaked, but there is NO extra water in the bottom of the tub. It does have extra water in there during the...


front loader washers fill accourding to how big the load size is on all front load washers.There should be no water above the center with a full load.If it is spinnig out and draining then it is working properly:)

Apr 21, 2010 | Electrolux EIFLW55HIW Front Load Washer...

2 Answers

Are you happy with the Kenmore 800 4.0 cu.ft. top load washer?


For large capacity, a front loader would be your best bet. An HE2 by Kenmore should be sufficient. If a toploader is overloaded, it's more likely to do damage. Also a Whirlpool Duet would work. Whirlpool makes Kenmore, so shop for the best price, (they are the same inside)

Apr 15, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Trying to figure out Cu. ft. capacity


hi wanda, most top load whirlpool units, they make the sears kenmore models, are around 3.0 cubic feet.
its not that important for a top loader, but when going to a front loader thats how they rate them.
what i would recommend is you buy a unit that will do the laundry that you will need to do for the next 15 years.
what i mean is if you have 2 or more young children, that you will be doing laundry for the next 15 years, then a full size front loader would do you good. size 3.5 c/f or larger, like a whirlpool he4 or he5.
if it is just for 2 people then a smaller unit would be better, like a whirlpool duet or sport model.
the reason for the choice is a front loader needs to be filled up for it to work properly. doing smaller loads in a front loader will cause them to shake and not work as well.
now be ready as the new washers will cost about 1,000 bucks.
another suggestion for 2 people would be the whirlpool cabrio top loader. i like them alot and they have very few parts to fail and have a good reliability.
good luck and happy shopping.
p.s. remember sears will match prices and give you 10% off the best price!!

Jan 30, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Washer filled with water & then stopped & will not work in any cycle.


could be a bad pressure switch did it fill all the way is it a top loader or front loader any noise or nothing

Dec 31, 2007 | Kenmore 24622 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...