Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer
Some troubleshooting steps you could try
Open the printer.
Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.
Hope this helps.
P.S. Please excuse any spelling or gramatical errors.
Posted on Jul 18, 2008
Tips for a great answer:
Feb 27, 2011 | Kodak EASYSHARE 5300 All-In-One InkJet...
Feb 11, 2011 | Kodak EASYSHARE 5300 All-In-One InkJet...
Jan 21, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...
Aug 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...
Sep 17, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...
Jun 16, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...
Sep 29, 2014 | Kodak EASYSHARE 5500 All-In-One InkJet...
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: