Question about HP Color LaserJet 2550n printer + HP Color Training and extended warranty ;U4929E, Next-Day exhange...

2 Answers

Flashing Lights I have a problem with my hp 2550 printer. The yellow and red lights are blinking, but the the blue light is lit but not blinking. However the black light is not on. I cannot print anything. What seems to be the problem

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

M black toner ight is flashing and i have changed 3 deferent cartridges but light still flashes. what is the solution to get rid off the blak toner light please?

Posted on Mar 11, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,901 Answers

From the User Guide:

Black, Cyan, Magenta, and Yellow Supplies Status lights
These lights indicate when a print cartridge is low (the light is on), or empty or missing (the
light blinks). The lights also indicate when a non-HP print cartridge is installed (the light
blinks and the Attention light is on).

If you don't have a User Guide click on the link below and save it for future reference.


2550n User Guide

If this solution has been helpful, please rate it. Thanks!

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light flashing


"Hello, Here is website explaining your red attention lights definitions."
Blinking Lights on the HP Deskjet F2400 All in One Printer Series

Please rate this answer, Thks.

Oct 27, 2015 | HP LaserJet 2420 Printer

1 Answer

Hp Besiness inkjet 1100 fault codes cayan maginta ink and paper lights come on dead


HP Business Inkjet 1100 stops everytime after the first line stars to print. The power is one, the ink drop light is lit, the "yellow" indicator light also on, and the paper light all on. None of them blinking. We replaced the yellow cartridge with a brand new HP 11 yellow cartridge. Turned the printer off and on to reset. Printer comes on everything looks good till you try to print anything, even a on line word doc? Then it happens again, so we replaced the yellow again...same thing. We ever cleaned print heads, Any assistance would be welcomed?

Jan 12, 2010 | HP Business Inkjet 1100dtn Printer

1 Answer

ZEBRA P310 LIGHTS BLINKING


Seems like you just need to run a cleaning cycle on the printer. Both lights flashing means you have printed a high volume of cards without cleaning the printer. Please purchase cleaning kit 105909-169 to clean your printer.

-- The Pros at www.DiscountIDStore.com

Sep 14, 2009 | Zebracard P420I Thermal Card Printer

1 Answer

Two lights are lit up on the operator panel of my Lexmark E232 printer: a steady blue ready light and a steady yellow toner cartridge light.


Two lights are lit up on the operator panel of my Lexmark E232 printer: a steady blue ready light and a steady yellow toner cartridge light.

Jul 10, 2009 | Lexmark E232 Laser Printer

1 Answer

Two lights are lit up on the operator panel of my Lexmark E232 printer: a steady blue ready light and a yellow blinking toner cartridge light. Neither the continue or cancel lights are lit up. This...


Sounds like your photocoductor is at lifes end. You can reset it by doing the following
1. Turn the printer off.
2. open the front cover
3. hold down the cancel X button while turning on the power and keep holding down until all lights stop flashing. Then let go of the x button and all lights should start to flash, close the front cover...and it should reset. You may have to turn the printer off and then back on once to be sure it is reset.

Jul 07, 2009 | Lexmark E232 Laser Printer

2 Answers

Blue light flashing light, red light on


The flashing means that the toner and/or the imaging drum is empty or missing (printing halts on these errors). Lights on steady means low toner.

Jun 24, 2009 | HP LaserJet 2550n Printer

1 Answer

HP 2550n will not print


From the HP User's Guide:

Black, Cyan, Magenta, and Yellow Supplies Status lights
These lights indicate when a print cartridge is low (the light is on), or empty or missing (the
light blinks). The lights also indicate when a non-HP print cartridge is installed (the light
blinks and the Attention light is on).

Here is a link to download the user guide:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00189910/c00189910.pdf

Oct 14, 2008 | HP LaserJet 2550n Printer

1 Answer

Yellow Toner Light Flashes - won't print


f the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset.
Reset the Drum counter as follows:

  1. Open the front cover.
  2. Locate the control panel button under the LED lights on the left side.
  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.

Aug 22, 2008 | Brother HL-2040 Laser Printer

1 Answer

Installing


not sure w/ this one, but is it blinking too fast on printer, the check color and black ink cartridges? and if yes what is the color of the light, is it yellow or red, and is the on and off lights, flashing?
-black and color blinking fast - install printhead
-black and color blinking slow - no cartridges installed
-on and off blinking black and color steady lights, calibrate

-hope this helps, or else contact kodak
-xoxo

Apr 11, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

868 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...