My dryer says f 22 what does that mean ? - Whirlpool Cabrio 7.0 Cu. Ft. Super Capacity Plus Electric Dryer

The lint filter is blocked or the air outlet is blocked.

Whirlpool cabrio dryer repair - YouTube

? 5:22
https://www.youtube.com/watch?v=aIxL38nnOLU
Sep 22, 2012 - Uploaded by Michael Steiger
Whirlpool kenmore safety fuse dryer not lighting GE Maytag. ...Dryer Troubleshooting - Not Drying or Taking ...

How to disassemble a Whirlpool Cabrio dryer

washerdryerrepairhelp.com > Dryers > Whirlpool > Whirlpool Cabrio

Jun 9, 2012 - How to disassemble a Whirlpool Cabrio dryer. Dryers ... If you need to take the drum out, there's a panel that holds it into place similar to the Maytag Neptune design. ... we respect your privacy and take protecting it seriously ...

How To Take Apart a Whirlpool Dryer ' Appliance Aid

Down where the exhaust hose attaches you will have to take that off. I almost guarantee that you have a mass of lint, pencils, lighters, small animals and everything else down there. You will have to get a flashlight to see it all.

That is a fault for the "Door Actuator Open Circuit". You may have not had the door closed completely and when you opened the door to check it out, you closed it completely. Another possibility is the sensor module is going bad.

"F22" is a door lock issue Press the "Stop" button twice to cancel the cycle if "F22" shows. Check that the washer door is firmly shut--open it and shut it and try again. Make sure there aren't items blocking the closing of the door. Don't overload the basket. Try the cycle again.

change usb cable

Check the thermal fuse. No continuity means a bad fuse. Part costs around 10 bucks no more.

F22 is a problem with the touch pad, check connections to the touch pad if ok replace touch pad assembly

If U R comfortable doing so, I suggest that U go to the Breaker Panel, and find the Dryer Breaker, turn it off for a min. then turn it back on.. By doing this, it Might re-set the Dryer... Once U turn it back on, and the Dryer comes on, I would watch it, to see if it flash's anymore Codes. If this doesn't Help, I suggest calling your Certified Maytag Repairman.. Hope this Helps U...

FIRST CHECK YOUR VENT IS CLEANED OUT THEN SEE IF TIMER MOVES WHEN PUT TO A TIMED CYCLE. IF SO MEANS VENT CLOGGED UP. IF STILL NOT MOVING MEANS TIMER CONTROL BAD. COST ABOUT 80-100 FOR PART. YOU COULD DO YOURSELF IF SOMEWHAT HANDI.

COULD BE ORDERED FROM SEARS PARTS DIRECT BY YOU.

OTHER WISE CALL SERVICER AND MAY COST 200.00 TO REPAIR. HOPE THIS HELPS