Question about Panasonic KX-T7633 Corded Phone

1 Answer

Personal directory? I'm not sure if you could even do this but it's worth a try. I can store names and numbers into the personal directory easily, no problem, but I was wondering if it is possible if the name stored could be displayed on the screen when the phone rings, instead of the number? It would make things a lot easier for the company I work for. Thank you!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

That's in a different location in the system. It sounds like you're using DID (where everyone has their own phone number). Your installer probably didn't assign names to the DID numbers, which does just what you are asking for.

We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you retreive the last number of a person calling you


Using the Call Log or Directories
You can make a call with the call log or directories as follows:
Outgoing Call Log
Incoming Call Log
Extension Number Directory
System Speed Dialing Directory
Personal Speed Dialing Directory
Calling with a call log or directory
While on-hook
>Press Left or Right
until desired log/
directory appears.
>Press ENTER.
>Press Up or Down until
desired item appears.
>Off-hook
To cancel or exit, press cancel or exit.
Clearing the log information
>While confirming the log information
>Press Up or Down until
desired item appears.
>Press "CLEAR".
Storing the caller's information for the Personal Speed Dialing Directory
>While confirming the log information
>Press Up or
Down until
desired item
appears.
>Press STORE or
ENTER.
>Press STORE or
ENTER.
>Press "EXIT" or
PAUSE.
To enter characters, refer to "Entering Characters".

Apr 15, 2011 | Panasonic KX-T7630 Corded Phone

1 Answer

How do I remove a persons name from the directory?


the System directory on the Samsung DCS is in customer programming in MMC 705, the easiest way to show you is if you watch the video I have uploaded for you, a text version of which is at

http://www.abbeytelecom.com . ( tip- find the speed dial number of the person you are wishing to remove first, this is the number next to their name)

Dec 01, 2010 | Samsung DCS 12 Corded Phone

1 Answer

I have a KX-T7456. Set 3 CO buttons for speed dial with new names and extensions. Busy light does not come on when those 3 lines are in use. Works on all the other numbers.


It's not speed dial, it's DSS. Names come from the directory (sys prog 004). The button programs from personal programming PROG 99? button 1+ext+STORE.

Carl

Jun 01, 2010 | Panasonic KX-T7456 Corded Phone

1 Answer

How do I delete an entry from my personal Directory?


Program another number over it, or try the TRANSFER key to delete it. You have to press STORE or ENTER after the number and the name to delete it.

Carl

Apr 07, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

Editing Directory in a Merdian 9156 Phone


There is a directory button on your Meridian-press this button and press the down arrow key until the name is displayed in the display window and press your left arrow key to change the name and number after making the correction press your save button to store.  I hope this helps.

Nov 26, 2008 | Meridian 9516 Corded phone

1 Answer

Caller id


First you need to verify if the caller id does that to all incoming calls, showing numbers only, or if it only does that to only numbers stored in directory. If it does that to all incoming calls then you need to check manual to see if there a setting to allow both name and number of all incoming calls. Either way you need to make sure caller id functions allows both name /number on display.

Oct 13, 2008 | Panasonic KX-TG5672 Twin Cordless Phone

1 Answer

NEC DTU-8D wiping the directory list


If it is in the system speed dial directory you have to go one by one and type "Feature, Redial, bin # where it is stored (system 00~79, station 80~99), Feature". This should wipe each Speed Dial listing.

If it is in the voice mail unit you may want to go phone by phone and log into the box. You will need to redo the following:

Personal Greeting
Recorded Name
Spelled Name
Directory Listing
Security Code

All these options are listed in each mailbox through a series of soft keys. Let me know if you need more info.

Aug 13, 2008 | NEC DTH-8D-1 Corded Phone

1 Answer

Changing numbers?


To program the personal directory Its diferent to program the system directory. the personal has 8 number capaciti and the system has 999 number. To program the System directory
1.- Enter to PBX program mode from your station 101
2.- Choose program 001 to enter the quick dial numbers
3.- Choose program 002 to enter (Or change ) the Labels

Jul 05, 2008 | Panasonic KX-T7630 Corded Phone

1 Answer

Having trouble putting memory of names and numbers.


First you have to push the PROG button on the phone (Its located by the REDIAL button.) Then you push the round SELECT button located by the on and off buttons. After you do this you simply use the number pad to enter the name in which you wish to store in your directory. If you mess up you can go back by using the volume - button.(also known as the CID button) When you have finished typing the name hit the round SELECT button. Now you are ready to enter the persons telephone number. When you have finished hit the SELECT button once more and you have finished storing it. To see the number in which you have just stored hit the DIR button, also know as the volume + button.  

Jan 17, 2008 | Vtech 5.8GHz Analog Cordless Phone

1 Answer

System Directory


I assume you have the manual. I found it very difficult to follow, very poor. While "on hook" enter the number you want to call. Press "store" or "enter". Enter the name referring to the graphics chart on pages 7 & 8. It is set up for Alpha characters and it depends on which software is installed on your phone. Example: If you want the letter "A" you press the number 2 one time. If you want the number "2", you have press "2" seven times to display the number 2. Use the toggle key to move to the next letter or number you want to enter. When you have finished press "Store". It may take awhile but that's how its done. Not a very good system for the average consumer in my opinion. But that's how its done. I was unable to upload the manual. Here's the link if you don't have it: http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Business-Home-Systems/System-Phones/Digital-Hybrid-IP-PBX-Phones/model.KX-T7630

Sep 10, 2007 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7633 Corded Phone Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...