Question about Whirlpool Dryers

1 Answer

I have whirlpool gold ultimate care 2 the dryer is heating but not getting real hot

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 254 Answers

You may be having a venting issue, disconnect the vent from the back of the dryer,if it drys normally then you have a clog in the vent line too the outside, if still takes too long too dry you may have a bad operating thermostat on the blower housing.

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace heating element on a whirlpool gold ultimate care 2 dryer


Go to www.repairclinic.com and enter model. You will be presented with a list of common repair parts and may be able to view a video showing disassembly.

Jul 25, 2016 | Whirlpool Dryers

1 Answer

My Whirlpool GOld Ultimate Care II electric dryer is not drying well any longer. It is 5 years old and a load must be run 2-3 times to get it to dry. Please help.


it could be your heating element but if you use dryer sheets take your lint trap out and see how well water will run thru it it may need to be washed in hot soapy water hope this helps

Dec 13, 2009 | LG DLG2524 Gas Dryer

1 Answer

I have a Whirlpool gold Ultimate Care II gas dryer and 2/3 times the ignitor glows and lights the gas, 1/3 times it won't. When the gas does light, it doesn't seem like it's getting hot enough to do...


I would suggest the coils on the gas valve . Also check the vent to make sure good air flow is getting out of the dryer . Try disconnecting the vent hose and drying a load to determine if maybe the vent is the problem .

Jul 14, 2009 | Whirlpool LGB6300 Gas Dryer

1 Answer

Whirlpool gold ultimate care II dryer shuts off then won't start for a while.


I am assuming this is a gas dryer and it gets hot to start then gas goes off? if so this is a problem with the saftey valve coils, this website will instruct you how to replace them.

http://www.acmehowto.com/howto/appliance/dryer/gdryer/check/gascoil.php

Jun 22, 2009 | Whirlpool GGQ8831L Gas Dryer

1 Answer

Washing machine not heating water


yes it will work but unless you have hot water going into the machine there will never be hot water there but you can just use it with cold water will not hurt anything just no hot water

Mar 09, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Getting no heat in my whirlpool gold ultimate care 2 dryer


It sounds like you blew a Thermal fuse on the heating element open the back unplug and on the right side you will see towards the top of the heating element 2 red wires check with a metter to see if good also pull the wires off the element at the bottom to check it let me know

May 11, 2008 | Whirlpool LGQ9858PG Gas Dryer

1 Answer

Whirlpool ultimate care II gold electric dryer


the top and the front has to come off

Feb 04, 2008 | LG DLG2524 Gas Dryer

6 Answers

Whirlpool Gold Ultimate Care II: No heat


didc, on a gas dryer, if the thermal fuse blows it will still rotate, but will not heat. Since this is a gas dryer, see if the ignitor is glowing. If it is, then you know the thermal fuse is good. If not, the thermal fuse may be blown or the ignitor itself and thus the reason for no heat. Catriver.7152136.jpg

Jan 01, 2008 | Whirlpool GGQ8831L Gas Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...