I have brand new CPU (foxconn g41mxe-v montherboard) every morning when i turn on there's no power indication. I brought this twice to where i bought this CPU. They said there's no problem with my CPU. Can you help me to solve this problem? thanks and regards!

hope this helps

Download Foxconn G41MXE G41MXE-K P10 motherboard BIOS ...

https://www.wimsbios.com > BIOS Updates > Foxconn

Download and update your Foxconn G41MXE G41MXE-K P10 motherboard BIOS - Foxconn_G41MXE to the latest version.

Download the driver from the manufactures website and run the setup, it will be done.

foxconn diy shut down 2012
foxconnchannel.com

http://www.foxconnchannel.com/

https://www.foxconnchannel.com/


Registry Expiration: 2023-09-08 23:50:45 UTC
thjey are dead, EOL, ended
not the company just this product like DIY, RAW mobo.

dead it is. no books no drivers , no bios upgrades.
just be happen it works, still.

If you are testing the motherboard by removing items plugged into it, remember to leave the CPU Heatsink on if the CPU is still in the socket otherwise the CPU will overheat in seconds or minutes and could be damaged.

If you power on the system, do the fans spin? such as the CPU heatsink fan? If no fans are spinning that are connected to the motherboard, see if the fan is spinning inside the power supply using a flashlight if needed. If not, try a known good power outlet or different plug on your surge bar or a new surge bar.
Even if the power supply fan is spinning, the power supply could be faulty. Borrow or buy one that matches the current wattage written on the side (ie: "output 350W")

Post back here with more info or if anything of this sounds like the issue you are having.

http://www.helpdrivers.com/motherboards/Foxconn/Socket_775/G41MXE/

DRIVER.SCROLL DOWN THE PAGE FOR LAN.

Hello download the driver here:

http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000483

Here is the G41MXE-V model:

http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000505

Click on tech support, and the driver at the right side for download.

Good luck

http://www.newegg.com/Product/Product.aspx?Item=N82E16813186187

Motherboard supports Processors with a Front Side Bus (FSB) of either 800Megahertz, or 1066MHz.

1333MHz FSB support is done with OVERCLOCKING.

http://ark.intel.com/products/30783/Intel-Core2-Duo-Processor-E6550-%284M-Cache-2_33-GHz-1333-MHz-FSB%29

Intel Core2 Duo E6550 processor has a 1333MHz FSB.

http://www.manualowl.com/m/Foxconn/G41MXE/Manual/297328

I reduced the view size to 120 percent. Go to Page 27.
Press DELete key to enter BIOS Setup.

Use Down Arrow key to highlight - Fox Central Control Unit
Press the Enter key

CPU Frequency Setting should be set to 333 (333MHz)
Intel processors are 'Quad Pumped'
333MHz x 4 = Approximately 1333MHz. (1332)

http://www.foxconnsupport.com/cpusupportlist.aspx?type=mb&socket=Socket%20775&model=G41MXE&cputype=Intel

Note the version of the BIOS program also.

Regards,
joecoolvette

http://www.foxconnsupport.com/download.aspx?models=en-us0000483&category=C000000001&series=en-us0000002&keywords=&sort=Drivers

http://www.foxconnchannel.com/product/motherboards/detail_spec.aspx?ID=en-us0000505

24 pin power supply about 500watt i use a 600w jim