Question about GE Wireless Optical Mouse

3 Answers

New GE cordless mouse

I have only had my GE cordless mouse for (4) days.. The receiver quit working...the mouse still lights up, when turned on....so I know the batteries are good....I also tried connecting the receiver to a different computer...other than the computer I use...still dead...nothing....zip....I also pushed the little button on the bottom of the receiver.....NOTHING....still dead....should I return the mouse and get my money back...or is there still hope?

Posted by on

3 Answers

PERFECT THANKS ........... a little tricky but doable

Posted on Oct 17, 2008

You have to plug in the USB device, then push the button (which also doubles as a blue light). After pushing the button on the USB device, then push the button on the bottom of the mouse. The 2 devices should then "see" each other, and the mouse will start working. (assumes good batteries in mouse in correct position!)

Posted on Jul 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

There should be a button on a mouse too, same like one you pushed on the reciever. Hope doing so would solve your problem.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Optical cordless mouse will not work. Have shut down computer, reconnected the USB to CPU (Receiver), pushed button on mouse. Red light blinks, but will not connect. What else can I do? Have lost...


I have a Logitech cordless mouse but had a problem recently. It fell on the ground and the batteries fell out. Put them back in, the mouse came back on but didn't work. Pushed the button on the mouse several times, no luck. The light at the receiver was always blinking whenever I pushed the button on the mouse, so I assumed that should work. After a few tries, I ended up pushing the button at the receiver and low and behold, the mouse was working again.
Have been using this mouse for years, had that problem only one.

Hope it helps.

D.

May 09, 2011 | GE Optical 98802 Mouse

1 Answer

My cordless mouse quit working.


Hi,

There are several different methods in resolving this issue. Before you perform these methods, make sure that the battery of your cordless mouse is fresh. Then, try this first method..
Method 1: Resynchronize your device with the receiver loadTOCNode(2, 'moreinformation'); To resynchronize the mouse or the keyboard with the receiver, follow these steps.
Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put any other wireless keyboards and mouse at least 6 feet away.
  1. Press the button on the receiver, and then verify that the light on the receiver starts to blink.

    Note Some newer Microsoft devices are permanently bound to their receiver and cannot be reset. If your device does not have a button, skip to Method 2.
  2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step.
  3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 4 again.
  5. For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed.
The following example shows the buttons to push to synchronize a wireless hardware device

mongkey_1.jpg
Method 2: Install the latest software loadTOCNode(2, 'moreinformation'); Download and install the latest Microsoft IntelliPoint and/or IntelliType software. For more information, visit the following Microsoft Web site:
http://www.microsoft.com/hardware/download/download.aspx?category I hope these works for you. Should you need the other methods, kindly reply for follow up. Good Luck! Mongkey "Understanding explains better..."

Jan 24, 2011 | Logitech Cordless Mouse

1 Answer

My mouse won't work. i've tried every combination of pressing the link button and the receiver button, turning it on and off, etc. it will work randomly one day and then not the next.


n the cordless mouse see wether the light in the mouse is working if working press the switch in the mouse and the adaptor conected to the computer also see wether the cordless connector drivers are installed in the device manager

Nov 29, 2010 | GE Wireless Optical Mouse

3 Answers

I have hooked up a GE 98548 wireless mini optical mouse. It worked the first time I tried it, but later would not work at all. What's next?


on the receiver there is a a little circle with the words connect around it. Its actually a button you press that and you should see the receiver should light up make sure the receiver is connected the computer and press down right on the circle. after it lights up press connect button on the mouse and it should start working again

Jul 02, 2010 | GE Wireless Optical Mouse

1 Answer

Mouse just quit working, installed new batteries red light works


Normal 0 Make sure that the batteries are good then do the following.

Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

Dec 07, 2009 | Logitech Cordless Mouse

1 Answer

Wireless laser mouse stopped working. KB OK. Tried Everything


Hi,
Under the mouse near the optical lens there should be a small connect button, press that and the button on the receiver too.
Also make sure the batteries in the mouse are new or fully charged.



Good luck

Jun 28, 2009 | Logitech Cordless Mouse

1 Answer

Logitech S510 mouse will not turn on


I am assuming since you need batteries that the mouse is cordless. If so you normaly have to sync the mouse with the receiver.If the keyborad and mouse came as a package it will only have one receiver.There should be corresponding sync buttons for these devices.

Oct 07, 2008 | Logitech S 510 (967555) (DH967555)...

1 Answer

Cordless Mouse Just quit working While In Use


Most cordless mouse I saw has a reset button. Press this button, make sure you're in the transmission distance from the receiver when you do this.

Sep 12, 2008 | Logitech Cordless Mouse

1 Answer

Cordless Mouse Just quit working While In Use


Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it to Reset/Connect the mouse to the receiver and work properly.
If not, try pressing the receiver button and then press the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

Sep 07, 2008 | Logitech Cordless Mouse

Not finding what you are looking for?
GE Wireless Optical Mouse Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Keyboards & Mice Experts

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

270 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jonathan Dator

Level 2 Expert

66 Answers

Are you a GE Keyboard and Mice Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...