Question about Konica Minolta magicolor 2430 DL Laser Printer

1 Answer

Konica minolta 2430

Have error 17h on konica minolta 2430 how do i fix it

Posted by on

  • Anonymous Mar 26, 2014

    drum unit detection error on konica minolta

  • Anonymous Mar 31, 2014

    Konica Minolta error message stating they have insufficient memory when scanning

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 16 Answers

Most likely you received this message after a toner was replaced. Reseat the cartridge and restart the printer. If that doesn't work remove all of the toner cartridges manually and reinstall.

Turn off the printer and open the top cover. Follow the toner cartridge all the way to the right side of the printer (on the white part). You should see a hole that looks like a cross. Take a pen or key and push down on the black button in that hole. While you are holding it down rotate the toner cartridge towards you. You want to get the colored roller on the cartridge about 1/2in away from the metal bar that says "consumable reorder". You should be in a position to take out the toner. Let go of the hole and remove the cartridge. Repeat the steps until all of the cartridges have been removed.

Turn the printer back on at this point. You are going to get toner not installed messages on the printer. Open the top cover and the cyan tray will be in place. Shake the toner and install. Close the cover and let it cycle to the next color (black). Repeat the process until all cartridges are installed.

If you are still getting the error you either have a bad cartridge or the carousel that the toners sit in is damaged.

Posted on Jul 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

17h error, paper comes up the back and stops gives this error


Error 17H is a rack rotation failure:
The toner cartridge(s) may not be sitting correctly, which would be the easiest fix - otherwise you have to carefully examine the inner workings of the printer itself, to see what is causing the rack to get jammed or slowed down at some point along the way.

Nov 20, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

Fatal Error code 17H is all it states.. will not print what does it mean and how do I fix it. Thank you


It is a rack rotation failure.

• The Rack Positioning Sensor is in the blocked state

when the Rack Motor remains deenergized.

• The Rack Positioning Sensor is not blocked a second

time even after the lapse of a predetermined period of

time after it has been blocked once while the Rack

Motor remains energized.

• The Rack Positioning Sensor is unable to detect the

deceleration control position after the lapse of a given

period of time after the Rack Motor has started while

the Rack Motor is turning.

• The count value of the edge of ON signal of the Rack

Positioning Sensor during each developing positions

are not a predetermined value while the Rack Motor is
turning.

Sep 28, 2010 | Konica Minolta magicolor 2430 DL Laser...

1 Answer

Konica Minolta magicolor 2430DLshowing Fatal o8h


Error 08 relates to the main motor having problems turning. Quite often this is caused by a faulty consumable (opc,toner or transfer belt). Could also be that the lid is not closing properly and stopping the toner carousel turning freely.

Apr 18, 2009 | Konica Minolta magicolor 2430 DL Laser...

1 Answer

Fatal error 17h


17H is the Rack Rotation error. If your toners are not rotating correctly, or if you have the wrong type (IE 2400 series toners in a 2500 series printer) you will get this error.

Feb 18, 2009 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

I have a Konica/Minolta 2490 copier that has a service code 17H what is this


17H is an error for the toner , either they are not in all of the way or the latch is not closed....to fix it simply take out the toner and put them back in making sure the latch is closed all the way :-)

Oct 03, 2008 | Minolta Printers & Copiers

1 Answer

Konica Minolta 2300 DL


Just sent you the manual.

Regards

Wayne

Oct 02, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Minolta 2300 dl laser printer fatal error 17H


had printer for approximately 2 years. Used daily in office setting. today the printer tried to print, then just stopped and it said fatal error 17H in the window. We cleared paper jam and rebooted, gives the same error message. Anything we can do?

Apr 14, 2008 | Konica Minolta Magicolor 2530 DL Laser...

2 Answers

Konica Minolta Magicolor 2300 DL - Fatal Error Code 0EH ????


I had the same problem one time, they told me to pull out all of the toner cartriges, power off, power on, power off, replace all cartridges and the problem went away.

Who knows why. If this doesn't work....

Call Konica Minolta tech support.

They were pretty helpful to me.

Dave

Nov 28, 2007 | Minolta magicolor 2300W Laser Printer

1 Answer

Errors


Rack rotation failure, I'm not 100% that this is that error, but does the rack, where the toner are move ? if not, move it with manually a little bit then restart printer.

Nov 14, 2007 | Konica Minolta magicolor 2430 DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2430 DL Laser Printer Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...