Question about Sony FD Trinitron WEGA KV-36FS120 36" TV

2 Answers

TV won't turn on, red light flashes twice

Tried to turn on my TV this morning. Red stand by light flashes twice and TV makes clicking sound like it's about to power up, but nothing happens. Tried unplugging, did not fix.

Thanks for your help!!!

My sons are desperate to play Guitar Hero!

Posted by on

  • Anonymous Jul 16, 2008

    Same thing happened to us. Found a TV repair man in yellow Pages - 2 minutes soldering at the back and the TV worked again.

  • e_ram06 Jul 17, 2008

    TV WON'T TURN ON, RED LIGHT FLASHES TWICE. IT SOUNDS LIKE IT GOING TO TURN ON BUT IT DOESN'T.

×

2 Answers

Same thing happened to me - got a TV repair guy from Yellow Pages. 2 minutes to solder at the back and it works fine now

Posted on Jul 16, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Your tv has hardware problem and Sony service person can fix it.

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Trinitron KD-27FS170 Tv will not turn on. It sounds like it is turning on/off but no picture or sound. The Stand-by/Timer red light is flashing 4 times, pause, then 4 times, etc.


This typically means you have a bad capacitor, you can inspect for any swollen or bulging capacitors however unless familiar with desoldering boards best leave it to a repair technician.

Jan 13, 2015 | Sony FD Trinitron WEGA KD-27FS170 TV

1 Answer

My tv keeps saying stand bye and it won't cut on all its doing is making the click noise and the red light keep blinking


Try unplugging it for 30 seconds and see if it resets. If not, take the model # and get on the internet for the manual and go to trouble shooting page. It should answer your questions

Feb 13, 2013 | Standard (CRT) Televisions

1 Answer

Samsung model hlt4675sx\xaa projection tv wont work. the stand by/temp light flashes red and the lamp light flashes green? it makes the sound that it makes when it turns on but no picture. we looked at the...


It could be the temp sensor going bad. This sensor sits on top of the metal housing which the bulb assembly slides into. The bulb assembly will have a hole on top and this is where the sensor is above. There is a small blue and white wire that plugs into it. If you pull the wire out and put a paper clip or wire in the coupling you will basically bypass the sensor connecting the blue and white wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would show up (which eliminates the bulb and color wheel) 3] 30 seconds later tv would shut down with 3 flashing lights. After bypass the tv turned on as always and hasnt shut down yet. Always un plug tv first. Get the replacement part to avoid overheating and possible fire

Jul 31, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

I have a Sharp 32"


try checking the system for timer or sleep mode operation try to setting it off

Jul 16, 2011 | Sharp 25R-S100 25" TV

2 Answers

Doesn't power up. Red standby light flashes.


How many times does it flash?

Odds are the A board components. Let me know how many times the stand-by light flashes, and I'll tell you want the fault might be.

Oct 25, 2009 | Sony KV-27S40 27" TV

1 Answer

Sony Projection Stand by indicator flashing red


Ur FBT,Fly Back Transformer high voltage is dead, the black block of plastic with a red wire with cap hook to a CRT(Tv Tube).

Sep 14, 2009 | Sony KP-46S25 TV

1 Answer

Tv will not come on


  • check to see if tv has sound when you turn on, then check menu for color, check if tv might be on timer. this might help!!!

Mar 19, 2009 | Sanyo DS27510 27" TV

1 Answer

Tv wont turn on only clicks and then flashes red timer light


tv wont turn on when i hit power it makes the clicking noise like it is going to turn on, but never does and the red timer light next to the power button just flashes.
help!
trinitron kv29f1u
only clicks and blinks

Jul 26, 2008 | Sony KV-35S42 35" TV

5 Answers

Sony Trinitron blank tv/no picture


When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?

Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Please Help


Is the red light flashing a code ? exaple 4 blinks pause 4 blinks ?

Apr 07, 2007 | Sony KV-27FV16 TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36FS120 36" TV Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...