Question about Belkin (F5D7050) 802.11a/g/b Wireless Adapter

1 Answer

Installing the driver

I spent two days with an internet connection using this adapter, to one day wake up and find it suddenly wasn't working. So I uninstalled the adapter and tried reinstalling it. I ran through the CD setup fine, but when it came to plugging in the adapter after this, it came up with the Found New Hardware option, prompting me to locate the driver. I pointed it to the setup file but it didn't find anything and so the hardware was not installed correctly. So I tried uninstalling the adapter again and restarted, only for it, on the restart, to come up with error message 'WLanCfgG: Load library Ralinktek.dll fail', which repeatedly appears no matter how many times I close it. What can I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

Check your device manager for your adapter-if the device status says your driver needs to be re-install. Re-install the driver manually-you might need to locate the proper file for your adapter's driver-most commonly a .inf file. Try browsing it in the cd itself under driver folders.

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a compaq presario SR5350F desktop computer and I can't connect to the internet. It was working fine up until a couple of days ago and went out during thunderstorms. I get the error message...


try using a new cable? or installing your drivers ? look in device manager and if you have a red x or a yellow sighn it could mean your net card or your modem went out ? hope this helps ?

Jun 02, 2011 | Compaq Network & Wireless Adapters

1 Answer

Good day, i am using an inspiron 2200 running windows xp. someone installed a static ip address on my cp and from that day i have been unable to connect to the internet. when i go to network connections...


Well first off know one installed a static IP your internet provider is the one that will do that for you when you get ready to go online if there are numbers in there remove them and select automatically detect settings. Most likely it is a Dynamic IP all you have to do is make sure that you have the driver installed for your card, your internet connection cable hooked up R-45 cable and once all of this is happening and lit your IP will do the rest if not then reboot the router or the modem not sure what you have they will send the proper routing goodies over the line and off you go. You just need to make sure that you are lit on your end and ready to go if for some reason nothing else works then contact your internet service provider and they will come out and make sure that you get set up. Thanks for using FixYa! John

Apr 08, 2011 | Dell Ethernet Card Network Adapter

1 Answer

I loaded a new hard drive on my Dell desktop and now can't get on the internet. My modem and connections are good. Computer says "no working netwok adapters in this PC. Do I need to buy something...


you need to install modem drivers for dial up internet connection and LAN drivers for DSL connection, the drivers CD normally comes with the system otherwise you can download your required drivers from the DELL WEB SITE
Plz do rate the solution if got help...
good day

Nov 22, 2010 | Dell Network & Wireless Adapters

1 Answer

The WPN111 RangeMax wireless UBS 2.0 adapter I bought a few days ago keeps disconnecting. At first the connection is fine throughout the day, but at night the connection fails. Internet access in the...


Do you have a good signal strength with the wireless USB adapter?
If not try moving the wireless router away from walls or metal objects and cordless phones, locate the wireless router higher.
See if there is a later driver for the wireless USB adapter, if so download and install it.

Dec 21, 2009 | NetGear WPN111 RangeMax Wireless USB 2.0...

1 Answer

My Acer Aspire 7520 works just fine. But one day the internet stopped connecting properly. I even tried ethernet cable but still will not work. Help!!!


check for the ethernet card , whether drivers are installed properly or not.. then check IP address provided by ur ISP is entered correctly or not..if DHCP is enabled no need to worry about it... check ur wireless adapters drivers ...reinstall them and ur device wil work properly..

Aug 18, 2009 | Network & Wireless Adapters

1 Answer

Hello. I have been using a Netgear WG111v2 adapter for some time now, and it has been working great until a few hours ago when I suddenly lost connectivity. I checked my connection activity to find that...


Hi,

Before you purchase a new adapter, I would suggest you to install the adapter using the latest adapter drivers. Visit the link below to download the drivers:

http://kb.netgear.com/app/answers/detail/a_id/713

Install the adapter using these drivers and connect to the wireless network.

I hope this information allows you to resolve this issue.


If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Regards
Anand

Aug 03, 2009 | NetGear USB 2.0-Stick WiFi 108 Mb WG111T...

1 Answer

My system was working fine one day. The next day, it won't connect to the internet, saying that Windows can not manage my linksys connection. I have a Dell PC using Windows XP Service Pack 3


There are two solutions that you can try first
Perform system restore to the earlier date that connection working fine
OR
Re install the driver of the wireless adapter
If you need further help please post.
Good Luck

Jul 06, 2009 | Linksys WUSB54GSC Compact Wireless-G USB...

2 Answers

Software malfunction


I assume they told you to uninstall the software, remove the adapter, then re install driver an re insert adapter, as this normally cures the driver fault. If they didn't try that, if the problem persists the adapter may be faulty although i think it's a software problem. Try not to use Windows to repair connection as it never works and resets your pc's ip address differently than your routers already given it.

Jan 24, 2007 | SMC EZ Connect g SMC2862W-G 802.11g/b...

Not finding what you are looking for?
Belkin (F5D7050) 802.11a/g/b Wireless Adapter Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...