Question about Apple (6612068) Sound Card

1 Answer

Muffled sound My G5 dual 2 gig(2004) tower's sound is muffled. Is it the little speaker in it? I tried to the Karmon speakers with the USB but it does not work at all? I see according to your site's spec, that this tower does not have a sound card. Can this problem of bad sound be repaired?

Posted by on

1 Answer

Plug it in properly and replace the internal speaker- simple

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound is muffled and coming out of one speaker


i would first try to use new speakers or see what happens with headphones plugged in, and if you have audio ports on front try that. if those are bad to your sound card is probably failing.

Jul 11, 2011 | Toshiba Audio Cards

Tip

No Audio/Sound


The computer is in amuted state
There are a few ways this can be fixed; one is to press the mute buttonon your keyboard if there is one. The other way is to go onto control panel,select "hardware and sound" then select sound, click your chosenaudio device , chose properties then chose the "levels" tab and makesure the audio output is not in a muted state if so click the speaker button toturn it off mute.


giles102.png


The headphones or specks are not connected to the pc or have become unattached
Make sure the headphones/specks lead is plugged into the correct portwhether being a USB port or audio port depending on the device. This may be inthe back/front of a computer, the monitor, keyboard or external audio adapter.

giles102_0.png
  • Green is for speakers
  • Blue is Line In
  • Pink is Microphone


You have selected a certain application to be muted while others are not muted

To check if an application has been muted, click on the little arrow onthe windows start up bar by the clock normally, and select speakers. You willthen get a new window showing any application requiring audio. If one has beenmuted the speaker below it will have a red mark on it, click the speaker buttonand it will no longer be muted.

giles102_1.png

Your sound device is not selected

To change the sound device, click on the little arrow on the windowsstart up bar by the clock normally, and select speakers. A new window willdisplay with a column saying device, there will be a drop down menu under apicture of a speaker where you can change the speaker's audio device.

giles102_2.png

Update audio driver

Your audio device may need a driver update, the updates can normally befound
On manufacture websites (Look at this page for more details http://www.fixya.com/support/r9159178-drivers

Try different speakers

Try different speaker/headphones to see if your speakers are broke.

Check the sound driver is installed

Go to control panel and find device manger this is normally under thesystems area. Click on "sound, video and game controllers" tab, ifthe audio hardware device is there, then you know the computer is aware of theaudio hardware driver however if it has a yellow mark next to the device,
This would indicate that the computer is aware of the driver however it doesnot have the correct drivers for it to work. This is where you are required to lookfor drivers sometime off a website or a CD http://www.fixya.com/support/r9159178-drivers

on May 08, 2011 | Audio Cards

1 Answer

Hi, I have a problem with my neo laptop. There is no sound from the internal speakers. I have uninstalled and reinstalled the audio driver and checked that it is up to date. There is only a brief muffled...


if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
make sure you have an earth ******** before touching any parts inside your computer
hope this helps

May 29, 2011 | NeoWave PC Audio Graphic Equalizer...

1 Answer

I recently purchased an M audio sterophile Usb soundcard. I want to connect my computer speakers up to it. I have tried many ways and dosnt seem to work? Please help.


you might need to install the sound drivers or select the right speakers
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem
have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable
hope this helps

Mar 17, 2011 | M-Audio M Audio Audiophile USB Sound Card

2 Answers

I bought a Gwc aa1500 5.1 audio usb adapter for my laptop. I tried plugging my axpro headphones into the adapter but all the audio seems to be coming through the front speakers. How can i get it to go...


This is an issue with the driver or configuration.

Make sure you have the latest updated drivers for the device

When sound is coming from front for 5.1 system, its most probably to do with settings.Stereo mode Outputs from front speakers only. Try finding a radio button inside sound settings for 5.1 Audio system.

It is most probably found under " Speaker Configuration" Settings.

Mar 12, 2011 | GWC AA1500 External Sound System

2 Answers

I cannot hear any microphone playback


I cannot hear any microphone playback 2) Installing the driver software for it takes sound out of my computer my microphone seems to be fine because the green light comes on when i test it, but no playback in speaker when i record. I know im jus missing one little thing...can you help me?

Feb 08, 2010 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

No output


Make sure you have your speakers connected to the main output. Also, in the "Universal Control" "Mixer" window, make sure that at least one of the mixes are assigner to "Mo", which stands for main output.

Feb 03, 2010 | PreSonus FIRESTUDIO Sound Card

1 Answer

I have a Dell Dimension 9100 and Creative Soundblaster X-Fi OEM soundcard. I have no sound coming from my speakers, only a crackling noise. I have tried all tests available on the PC/control panel. I have...


Ok
Do the following, power up the PC and hit F12
Select DIAGNOSTICS - let em load and run only the sound test. This will make sure the speakers and cable are working. (make sure thewy are plugged into the right hole) then power on the system and hit F2 to enter the BOIS and make sure you disable on the on-board sound card. This is the one that is on the motherboard not the add in card.
Reboot the system and then try your speakers in the SB card and see what happens
Hope this healps you
Mark

Aug 24, 2009 | Audio Cards

1 Answer

Speakers don't work!


Sometimes, the colors on the jacks should be reversed. Try doing that - reverse which colors the jacks go into on the back of the PC and see if you get sound that way. Turn the volume down, just in case,

Jun 21, 2009 | HP (400745-001) Sound Card

Not finding what you are looking for?
Apple (6612068) Sound Card Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Cards Experts

Ben Armstrong

Level 2 Expert

332 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

ussick

Level 2 Expert

52 Answers

Are you an Apple Audio Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...