Question about Computers & Internet

1 Answer

I have purchased a Microsoft Wireless Optical Desktop 700 (Keyboard & mouse). I have plugged the wireless receiver in, and get a flashing green light when I press the button on the front. The green light goes off after about 30 seconds. The mouse has power & worked for 30 seconds when I furst plugged in, then stopped responding. I couldn't get the keyboard to work at all. I have pressed the connect buttons on both the mouse & the keyboard - nothing happens. I have Windows XP so it should be compatible. Help!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

When you say you pressed the connect buttons on both the keyboard and mouse, do you mean you pressed the connect button on the receiver, and then you pressed the connect buttons on the mouse and keyboard? If not, then that's what you have to do. The 30 seconds of blinking on the receiver is normal, as it gives you time to find and press the buttons on the mouse and keyboard.

I hope this helps, and good luck!

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn on the microsoft wireless keyboard 1.0a


The Microsoft Wireless Optical Desktop 1000 hardware set includes the Microsoft Wireless MultiMedia Keyboard Version 1.1a, Microsoft Standard Wireless Optical Mouse Version 1.0a and the Microsoft Wireless Optical Desktop Receiver version 2.1a.
The receiver connects to your computer through a USB port.
The product installation CD that ships with the hardware set includes the software drivers that are required to install the Microsoft Wireless Optical Desktop hardware on your Windows computer.

Insert the batteries that are included with the hardware set in the keyboard and mouse.
The battery installation latches are located on the bottom of the hardware devices.
Place the product installation CD in your computer's CD drive.
The hardware installation wizard will open automatically.

Plug the receiver into an open USB port on your computer when prompted.
Follow the wizard to synchronize the mouse and keyboard with the receiver.
Close the wizard when it finishes to complete the installation process.

http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=058

Jun 29, 2013 | Computers & Internet

1 Answer

What's the prices/rate of Microsoft wireless optical desktop receiver 2.1 model 1028, Microsoft standard wireless optical mouse model 1025 and Microsoft wireless multimedia keyboard 1.1 model 1014


Microsoft wireless optical desktop receiver 2.1 model 1028 - varies from Rs. 1900-2200
Microsoft standard wireless optical mouse model 1025 - varies from Rs. 400-600
Microsoft wireless multimedia keyboard 1.1 model 1014 - varies from Rs. 700-900

Dec 07, 2010 | Computers & Internet

1 Answer

For 2 years years I have a Microsoft Desktop Receiver 3.1 with a Microsoft Wireless Laser Mouse 5000 v1.0 and a WIreless Laser Keyboard 6000 v2.0. Things were working fine until this morning when the...


Goo0dness, Had this myself just last week. Fortunately I had the old keyboard and mouse and plugged it in to get access. I deleted the wireless keyboard from device manager. rebooted the machine, quickly changed the mouse and keyboard back to the wireless one and it all came back on. saved me buying a new one. Hope this works for you.


Please rate my help++++Thankis for using FIXYA

May 15, 2010 | Microsoft Wireless Optical Mouse USB...

1 Answer

Microsoft wireless keyboard 700 v2-0 not working


Your keyboard MS 700 v2.0 needs a USB receiver to work. They are pert of set. You may also have a wireless mouse MS-700 that is also part of this set.
1. Do you have the receiver ? This has a USB connector that must plugged in to your PC's USB port
2. Are the batteries in your keyboard dead ? If so change them for fresh ones
Then proceed with the instructions in the Quick Start Guide which can be found from this webpage
Microsoft Hardware
Note the light on the receiver only flashes when you press the 'connect' button. At all other times it is normally out. There usually no lights on the keyboard. You should not need extra drivers as they part of the OS if you are using Windows XP or 7.

If you still have problems see
Your wireless mouse or keyboard does not respond or you receive The...
or search on the internet for our specific case

8.March.2015

Dec 05, 2009 | Microsoft Wireless Optical Desktop 700 v2...

1 Answer

I have microsoft desktop elite keyboard 1011, and the little receiver that plugs into the USB has been broken


I don't know of any company that sells the receiver separately. Your best bet is probably ebay. What you're looking for is "Microsoft Wireless Optical Desktop Receiver 2.0A"

Oct 05, 2009 | Microsoft Wireless Desktop Elite...

1 Answer

Can't install Microsoft Wireless Desktop


you need to resync the mouse and keyboard to the wireless receiver. you hold the button down on the receiver until you see a flashing light and then you press the button on the bottom of the key board. then you do the same thing for the mouse.

Feb 27, 2009 | Microsoft Wireless Optical Desktop Comfort...

1 Answer

MS optical desktop 700


try one of the method below:
Method 1: Try different ports loadTOCNode(2, 'moreinformation'); Warning If you have to change a PS/2 connection, shut off the computer, make the changes, and then restart the computer. Do not plug a PS/2 device in the PS/2 port while the computer is running.

To determine whether the problem is related to the ports on the computer, use only the two cables that are included with the wireless desktop receiver, or the single cable that is included with a mouse.
USB keyboard and USB mouse loadTOCNode(3, 'moreinformation'); If the USB cable is currently connected to a USB hub, disconnect the device from the hub, and then connect it to a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if one is available.

Note Only one USB connection to the computer is required, even if your device has two USB plugs. If the problem persists, disconnect other USB devices and connect only the USB plug from the receiver to a USB port on the computer.
PS/2 devices loadTOCNode(3, 'moreinformation'); If your devices are connected to PS/2 ports on the computer, verify that you have the following configurations: • Verify that the USB plug for your mouse is connected to the green USB-to-PS/2 adapter and that this adapter is plugged in the mouse PS/2 port on the computer. The mouse PS/2 port on the computer may also be green. If you are not sure which PS/2 port is the mouse PS/2 port, see the documentation that came with the computer. • Verify that the USB plug for the keyboard is connected to the purple USB-to-PS/2 adapter and that this adapter is plugged in the keyboard PS/2 port on the computer. The keyboard PS/2 port on the computer may also be purple. If you are not sure which PS/2 port is the keyboard PS/2 port, see the documentation that came with the computer.If you have to change your configuration, shut off the computer, make the changes, and then restart the computer. If your mouse or keyboard has both USB and PS/2 connections, try using the other connection.
PS/2 keyboard and USB mouse loadTOCNode(3, 'moreinformation'); Verify that the USB mouse is plugged in a USB port on the computer and that the purple keyboard PS/2 plug is connected to the purple PS/2 port on the computer. If you have to change the PS/2 connection, shut off the computer, make the changes, and then restart the computer.
uparrow.gifBack to the top
Method 2: Install fresh batteries loadTOCNode(2, 'moreinformation'); Both the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. If the problem persists, install a fresh set of batteries in the device that you are experiencing problems with.
uparrow.gifBack to the top
Method 3: Resynchronize your device to the receiver loadTOCNode(2, 'moreinformation'); To resynchronize the mouse or keyboard to the receiver, follow these steps.

Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put other wireless keyboards and mouse more than six feet away. 1. Press the button on the receiver, and then verify that the light on the receiver starts to blink. 2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen.

Otherwise, go to the next step. 3. Press and release the Connect Channel button on the bottom of your mouse or keyboard. 4. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 4 again.
uparrow.gifBack to the top
Method 4: Install the latest software loadTOCNode(2, 'moreinformation'); If you are troubleshooting a wireless mouse, download and install the latest Microsoft IntelliPoint software. For more information about IntelliPoint software, visit the following Microsoft Web site:
http://www.microsoft.com/hardware/mouseandkeyboard/Download.mspx (http://www.microsoft.com/hardware/mouseandkeyboard/Download.mspx) If you are troubleshooting a wireless keyboard, download and install the latest Microsoft IntelliType software. For more information about IntelliType software, visit the following Microsoft Web site:
http://www.microsoft.com/hardware/mouseandkeyboard/Download.mspx (http://www.microsoft.com/hardware/mouseandkeyboard/Download.mspx) uparrow.gifBack to the top
Method 5: Clean the mouse lens loadTOCNode(2, 'moreinformation'); This problem may occur if you are using an optical or laser mouse and the lens on the mouse is dirty. To clean the lens of an optical or laser mouse, follow these steps: 1. Use a dry cloth to clean the bottom surface of the mouse. 2. Check to see whether the mouse functions correctly. 3. If you see dust on the bottom of the mouse, use a can of pressurized de-ionized air to blow away the dust on the lens. 4. Check to see whether the mouse functions correctly. 5. If the pressurized air canister is not available, blow dry air on the lenses by using your mouth one or two times. 6. Check to see whether the mouse functions correctly. 7. If these steps do not resolve the problem, use a cotton bud to clean the lens without scratching it.

Sep 18, 2008 | Microsoft Wireless Optical Desktop Comfort...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...