Question about Shure Beta 58A Professional Microphone

3 Answers

New cable for my Shure Beta 58A Professional

I bought a replacement cable for my Shure Beta 58A microphone and am getting no sound from my amp. I bought the cable from a local music store and it is XLR to 1/4". Any idea why it isn't working?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I scored an old beta 58 but the 3 pin connector was missing. i bought another one but i don't know which wires to connect where. plus there are only two wires, is that right? I'm a bit of a noob but I like to try things myself :)

Posted on Sep 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Some cables are wired different than others. I would check the continuity of the cable with an ohmeter and compare the wiring of the 2 mikes to see if they are the same.

Posted on Jul 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,794 Answers

It could be the wiring in the 1/4" jack in your amp. Check the metal contact plates on the 1/4" jack in your amp and see if they are getting contact to the jack. Sometime they get bent.

If the XLR end of the cable can be serviced, check the ground connection to the cable and see if its good.

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to open a shure beta 58 microphone?


To open a wired Shure Beta 58, unscrew the handle at the mid point. A new cartridge from Shure includes the upper part of the handle.

The Beta 58A is different.

Jun 19, 2014 | Shure SM58 Professional Microphone

1 Answer

HOW DO I SYNC A SHURE LX WITH A BETA 58A


I'm missing something here...Shure LX is wireless system with option of SM58 head...Beta 58A is a corded mic???

Owners manual...
http://www.fullcompass.com/common/files/16770-lx%20wireless.pdf

Feb 05, 2013 | Shure LX-2 With SM58 Professional...

1 Answer

Replace cartridge beta 58a


Contact Shure for replacement cartridge.

Feb 01, 2013 | Shure Beta 58A Professional Microphone

1 Answer

Beta 58a switch on/off


Sorry, the Beta 58A is not offered with a switch.

Sep 26, 2011 | Shure Beta 58A Professional Microphone

2 Answers

I have A wirless slx 2 beta 58A and it rattles and now its stopped sendinga signal to the receiver any ideas


Oh, that doesn't sound good. That will need to be sent to the factory for repairs. Information is on the Shure website at www.shure.com/service

May 15, 2010 | Shure Beta 58A Professional Microphone

2 Answers

Is there a way to open up a Shure Beta 58A?


Once you remove the grill, there is a C-Clip that holds the cartridge down into the handle. Use some c-clip pliers to pull the c-clip out of the handle. The c-clip will remain around the post on the cartridge, but that's ok.

Feb 27, 2010 | Shure Beta 58A Professional Microphone

1 Answer

Can you tell me how to remove the mic head off a shure ut2 beta 58a wireless and is it compatible with any other shure wireless thanks


The Beta 58A head simply unscrews from the handle (just below the grill). It will fit all Shure handheld transmitters.

Feb 16, 2010 | Shure Beta 58A Professional Microphone

Not finding what you are looking for?
Shure Beta 58A Professional Microphone Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shure Microphones Experts

Rick

Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Shure Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...