Question about Canon - SUPER G3 FAX BOARD-T1 (0450B002AA)
Customer has a Canon fax that displays a E004 error code. It does not work until you turn if off and back on. But when you try to copy a page or receive a fax it goes into E004 error. What is wrong? Help!
The error keeps flashing and the machine will not work. The error reads, "check cover/cart". We put the cartridge in and out about 10 times and the same error message keeps flashing. the fax machine is still not working. Help!
Posted on Apr 26, 2007
SOURCE: cannon super G3
I am getting a error message that says toner is not set, lift set and insert toner. But the toner is in good and I can't get rid of the message and allow it to work
Posted on Apr 24, 2008
Open cover, remove toner, close cover.... not sure why this happens, but this is the only way that we have found to get around the error. After doing this 3-4 times, it seems to reset itself and work just fine.
Posted on Dec 29, 2008
Tips for a great answer:
Jan 12, 2015 | Canon imageCLASS D-480 - 23 PPM...
Mar 04, 2010 | Canon LaserCLASS Fax 710 Printer
Apr 25, 2009 | Canon - SUPER G3 FAX BOARD-T1 (0450B002AA)
Dec 28, 2008 | Canon - SUPER G3 FAX BOARD-T1 (0450B002AA)
Dec 15, 2008 | Canon - SUPER G3 FAX BOARD-T1 (0450B002AA)
Sometimes turning it off and on again fixes it. However, we started having a problem where it would print out one page after you powered it back on again and then give the "incorrect paper size" message. I've found that by either holding down the green button or repeatedly pressing it while it powers back on (and held until the first page prints) fixes the problem.
Jun 02, 2008 | Canon - SUPER G3 FAX BOARD-T1 (0450B002AA)
333 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: