Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Washing machine mal functioning,

Machine is still working but just pauses longer at the end of the wash cycle and before the spin cycle and makes noises as if it has had it, ( as if the motor is struggling) but the end result is still good.

I am worried if in the worst case scenario what will happen can it catch on fire?
The machine is 14 years old

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 57 Answers

I WOULD CHECK THE PUMP AND THE HOSES CONNECTED TO IT.ALSO CHECK THE BEARINGS TO DO THIS JUST ROCK THE DRUM FROM SIDE TO SIDE IF THERE IS PLAY THE BEARINGS IS GONE

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its stops when it reaches in 39 minute the function set on cottons what is the problem


Try resetting the mainboard by removing the wall plug overnight. May also be a faulty lid switch if it is a top loader.

  • Hello, my washing machine stops completely when it reaches ... www.shopyourway.com > Manage My Life > Questions ... my washing machine stops completely when it reaches the pause cycle, ... Answered in 5 minutes ... Kenmore washing machine 417 44252500.
  • Washing machine stops mid cycle - White Goods Help www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help Possible causes when washing machine stops mid cycle by a repairman with 30 years experience.
  • What could cause my washing machine to stop before the ... diy.stackexchange.com/questions/21181/what-could-cause-my-washing... What could cause my washing machine to stop before the ... i.e. it never reaches the end of the cycle ... What would cause my washing machine to stop at the rinse ...
  • Washer Stops Mid Cycle - Repair Parts - RepairClinic.com www.repairclinic.com/...A-Washing-Machine/50---/Washer-stops-mid-cycle ... listed below for the symptom Washer stops mid cycle are ordered from most likely to least likely to occur. ... Electrolux Front Load Washing Machine Disassembly
  • once my washing machine reaches the rinse cycle, about 3 ... https://answers.yahoo.com/question/index?qid=20080526150940AA3izVT
    • RESOLVED
    • 6 POSTS
    • 5 TOTAL ANSWERS
    2008-05-26 · Once my washing machine reaches the rinse cycle, about 3 minutes after ... Once my washing machine reaches ... My washing machine stops after the ...
  • Common Problems to all Washing Machine Brands ' Washing www.appliancerepair.net/washing-machine-repair-2.html Washing machine designs vary widely, ... but stop agitating after a few minutes and fill some more. ... stop the spin cycle and unplug the washer.
  • My washing machine will not spin and now it does not stop ... www.shopyourway.com > Manage My Life > Questions My washing machine will not spin and now it does not stop when it reaches the water level. ... Answered in 5 minutes
  • washer stops in the middle of washing cycle - Appliance ... forum.appliancepartspros.com > ... > Washer Repair
    • 6 POSTS
    • FIRST POST: 2012-02-07
    2012-06-22 · Appliance Repair Forum > Appliance Repair Help > Washer Repair » washer stops in the ... but when the timer reaches 24 minutes left to ... Washing Machine stops ...
  • LG Washer Stuck Timer 2 - YouTube Youtube
    • BY SBUBANDIT
    • 14 MIN
    • 4.9K VIEWS
    2012-08-29 · Video embedded · In this video the washer display shows 8 minutes remaining in ... machine stops and turns ... 10kg Top Load LG Washing Machine


  • http://www.bing.com/search?q=washing+machine+stops+when+it+reaches+39+minutes&qs=n&form=QBRE&pq=washing+machine+stops+when+it+reaches+39+minute&sc=0-47&sp=-1&sk=&cvid=04BC47135B524BD8B5BAC3759F010C1B

    Jun 10, 2016 | Washing Machines

    1 Answer

    My Defy DAW 365 washing machine goes through the whole washing cycle but it just won't spin. It does drain between the washing cycles.


    If the poly-vee drive belt in your washing machine has snapped, the motor will no longer be able to turn the drum. The drive belt is an important component of any washing machine as it drives the motion of the unit where the clothes are washed and spun. If your washing machine is making a loud noise or no longer spins, then the belt is probably worn or damaged.

    Oct 23, 2015 | Washing Machines

    1 Answer

    Oko 72630. Why is it stuck on rinse cycle?


    Could be several reasons:
    - Selected the "Night cycle" program (means standing with the drum full of water, reason: too much noise in the spin cycle)
    - Set to the "Rinse hold" (means standing with the drum full of water, reason: wrinkles on the clothes)

    According to your description I think that this is not a failure otherwise error E20 will be appears on display.

    Once the washing programme has come to an end, END illuminates on the programme progress display.
    If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes.
    1. After a rinse hold, the water must first be pumped out:
    - Either press the START/PAUSE button (the water is pumped out and the washing is spun according to the completed programme;
    After the START/PAUSE button is pressed again, the spin speed can still also be changed during spinning), or
    - Turn the programme selector to PUMP OUT and press the START/PAUSE button (the water is pumped out without spinning),or
    - Turn the programme selector to SPIN or SHORT SPIN and press theSTART/PAUSE button (the water is pumped out and the washing is spun or gently spun).
    At the end of this programme step, the END indicator will illuminate.
    2. Open the door.
    As soon as the DOOR indicator lights up green, the door can be opened.

    Dado

    Aug 15, 2015 | AEG Washing Machines

    1 Answer

    Zanussi washing machine pause button flashing machine wont work iz141s


    Disconnecting the wires from the main PCB helped resolve half the problem, but the machine still does not rinse and spin. Unless programmed manually. Still, that's easily done at the end of a wash cycle. Is liveble.

    Jul 24, 2012 | Zanussi ZWF1440 Front Load Washer

    1 Answer

    Washing machine will not start


    we had a very similar problem, our machine is only 12 months old and the filter at the bottom front of the machine has a small fan in it the filter was blocked with a coin blocking the fan from turning after reomoving the coin the fan was able to turn and the machine functioned correctly. hope this helps. tony

    Jul 19, 2012 | Tricity Bendix AW1000W Front Load Washer

    1 Answer

    What is erro code 6e on a samsung washing machine


    Don"t worry too much about the error code, press pause, and then press pause again, the cycle should continue. If the counter does not countdown, ideally,as long as your washing is in the machine for 30-35 mins that should be ample time, then press pause and put your dial on the final cycle from rinse to spin, if this does not work, try picking a longer wash cycle, leave for 30-35 mins, then press pause and fast-track to your final stage of rinse to spin, Good Luck!

    Apr 16, 2011 | Washing Machines

    1 Answer

    My Bosch front end washing machine will not start a cycle. Door is closed tightly and when I push start/pause red light comes on & immediately goes off-this happens every time I push the start/pause...


    My Bosch washer turns "on" and water runs but it does not spin or complete wash. I hear the machine "clicking" as if it is attempting to to function but no spin or full wash cycle.

    Oct 17, 2010 | Bosch Axxis WFL 2060 Front Load Washer

    1 Answer

    Our hoover ultra care 1300 large load washing machine spin fault


    The most common cause of machines stopping mid cycle is not draining. Your machine should have a filter behind the kick plate at the bottom.
    If this is not the case please post back for further assistance.

    Jan 21, 2009 | Hoover UltraCare HC6 130M Front Load...

    1 Answer

    Tricity Bendix AW1400W Won't spin or agitate.


    this could either b the motor brushes or the timer check the brushes first they r mounted on either side of the motor unplug the machine b4 u start good luck

    Aug 26, 2007 | Tricity Bendix AW1400W Front Load Washer

    Not finding what you are looking for?
    Fisher and Paykel GWL11 Top Load Washer Logo

    Related Topics:

    33 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Fisher and Paykel Washing Machines Experts

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...