Question about BenQ FP731 17" LCD Monitor

1 Answer

Kds vs-f14 my lcd monitor kds vs-f14 has no picture but has a dim light ,i found a smd resistance R114 burnt , i donnot know value of this resistance,please tel me the value and any suggestio for repairing the monitor thanks a lot

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

There is usually an identical resistor somewhere else on the circuit board, so if you cannot read the colors of the burnt one, you can read the colors from an identical resistor on the same board. If you just replace the resistor, it will probably just burn out again or damage another component, you have to find the cause of the resistor burning out, most likely an electrolytic capacitor failing. Look for bloated or seeping capacitors and replace those as well. Also look for broken or burnt toroid coils.

Posted on Jul 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My monitor screen get pinkish , and its get automatically to normal but its not permanent . whats d problem

i gotta know if ur monitor is crt or lcd??
if lcd, Geekman's solution sounds good....
but for crt, u gotta look for dry souldering esp at the crt base..also check the resistances, good heater pin contact, the crt base therein..beware u shld b a professional !!

Oct 23, 2009 | SAMTRON 55V 15" CRT Monitor

1 Answer

Rad-5 LCD has no picture


This usually means the power board is not putting out the correct voltages to run the monitor correctly. The power board can be repaired if you can solder parts. Check out the pictures on our web site at: Now open the back of your monitor and check for parts that look like the blown capacitors in the pictures on our site. Replace any that you see and you should be back running again. The values you need to purchase will be marked on the sides of the bad ones that come out of your board, it will be marked like 220uf, 470uf, 1000uf etc and a voltage value. Be sure to order a high quality part not like from Radio Shack, also use a high temp replacement 105c marking. If you don't want to do the repair yourself we do offer a repsir service for $35 plus return shipping. Let me know if you have any additional questions.

I hope this helps, if so please rate our solution.

Corporate Computer

Sep 18, 2009 | KDS RAD-5GS 15" Flat Panel LCD Monitor

2 Answers

Monitor display problem

FLATRON E700S (EB770G-NA)_(CA-109)_(EB770G).pdf search for this file in google and download it for free and this could help ur problem solve

Jun 03, 2009 | LG Studioworks 700S 17" CRT Monitor

1 Answer

Philips 190G ->

My solution:
Open the monitor. Take off the mainboard. There´s a supply board for the backlight under it.
Replace the two purple capacitors (150uF/25V). These are from a bad batch.

Also replace fuse F1 (lightbrown SMD-component) on the bottom of that board (near the long side).
It has blown as a result of the bad capacitors.

In my case the values were dropped to 25 uF. And the internal resistance (R) was more than 2 ohms.

That´s it. Hope it helped you.

Aug 18, 2008 | Philips 190B6CB/27 19" LCD

2 Answers

LCD Monitor goes off after 2 sec.

Check all cracked solder joints and resoldered and check two smd transistors near the inversors good luck

Aug 11, 2008 | Proview PL913B 19" Flat Panel LCD Monitor

1 Answer

Picture problem

You might want to try another smaller value of resisters I guess. Before you do that, check and adjust image setting using the screen buttons.

Mar 16, 2008 | Gateway FPD2275W LCD Monitor

1 Answer

KDS Radius Rad-5

First try it with another computer to verify monitor vs computer. If it is the nonitor, it's probably not something she can handle. Gary(Honkity Hank)

Sep 18, 2007 | KDS Radius RAD-7 17" Flat Panel LCD...

Not finding what you are looking for?
BenQ FP731 17" LCD Monitor Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts

JP Services
JP Services

Level 2 Expert

310 Answers


Level 3 Expert

2600 Answers


Level 1 Expert

6 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides