Question about Panasonic Car Speakers & Subwoofers

1 Answer

Have a car audio Panasonic CQ-5300U stereo that the display show SET and will not change. I have pushed the reset button with no change. Does anyone know what is wrong with this unit?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you figured out the prob, let me know

Posted on Dec 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CHANGE THE TIME


    • 1

      Refer to the section of your owner's manual that addresses the car radio. Each car radio is different in the way you set the clock. If you've installed a car radio other than the one that was manufactured with the car, consult the manual for that radio.

    • 2

      Know that if this is the first time you're setting the clock or are setting the clock after installing a new battery in your car, you have to set the hour and the minute of time. Often, you set the clock with either the radio station up or down arrows. On some car stereos, you use the CD track selector buttons for setting the clock.

    • 3

      Using either the CD or radio selector buttons, set the hour first. Push the button labeled "Set" or "Clock" and then set the minute with the same procedure. When setting the minute, some manufacturers allow you to move through in increments of five by pressing and holding the button. If the time of day were 2:49 p.m., for example, you would push the button 13 times, including nine times to display :45, then four additional times incremented by one to display :49. Push the "Set" button or the "Clock" button.

    • 4

      Determine whether your car stereo is equipped to automatically change when Daylight Saving Time begins and ends. If it hasn't changed at 2 a.m. of the time-changing date, you know it isn't equipped for this. In that case, set the hour either forward or backward and the appropriate time of the year.

    • 5

      If you can't figure out how to set the clock on your car stereo, wait until noon on any given day, disconnect your car battery and reconnect it.


Read more: How to Set the Time on a Car Stereo ' eHow.com http://www.ehow.com/how_5003245_set-time-car-stereo.html#ixzz1MlfuX6eT

May 19, 2011 | Car Speakers & Subwoofers

1 Answer

How to change clock on Pioneer cxc5719 car radio?


1 Turn the ignition key to On or Accessory. Pull up the emergency brake. 2 Press Source or Power to turn the Pioneer car stereo off. 3 Press the Clock button to display the time. 4 Press and hold the Function or Audio button for 3-4 seconds. The display will come on, and the hour should flash. 5 Use the Up or Down buttons to change the hour setting on the stereo. 6 Press the Left or Right keys to get to the minutes. When the minutes start to flash, press the Up or Down keys to set the clock to the correct minutes. 7 Press the Function or Audio button again to exit.

Mar 25, 2011 | Car Speakers & Subwoofers

1 Answer

Installation instructions for a Panasonic CQ-C8413U car stereo.


That all depends on what it's going in to. Smartest thing would be to go to a place that sells and/or installs car systems, give them your stereo model, and car it's going in to info, and they can usually supply you with an adapter plug that will allow you to plug one in to the other and minimize wiring nightmares.

Mar 06, 2010 | Panasonic Car Speakers & Subwoofers

1 Answer

Need a user manual


http://www2.panasonic.com/consumer-electronics/support/Audio/Mobile-Electronics/CD/model.CQ-C1100U
[{----------}]then download it[{----------}]

May 01, 2009 | Car Speakers & Subwoofers

1 Answer

CANNOT RESET CLOCK


1) Press SOURCE and hold it until the unit turns off.
2) Press AUDIO and hold until clock appears in the display.
3) Press AUDIO again to display the setting u need to configure.
- when u found clock, press < or > to select the segment of the clock display you wish to set.
- press /\ or \/ to set the clock.
- press BAND or hold AUDIO when finish.

YBC (/\)

Apr 27, 2009 | Car Speakers & Subwoofers

1 Answer

I have a CQ-RX400 car stereo that i just bought and the front display keeps flashing from ipod-reading-cd-usb Etc. and i just want it to stay at the time or radio station name. how do i do this?


You have to turn off the "DEMO" mode on your Panasonic radio. Check your owner manual for more detail. By default the radio run in "DEMO" mode when you use it for the first time!

Oct 16, 2008 | Panasonic Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Car Speakers & Subwoofers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...