Im a mexican tv tech having touble with a Philips 32ps 55s 321. It keeps shuting off after a few seconds. what would be the soulution and where can i get info about the functions of pins of tda 9588h /n1/ 3 ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I do not have a model number to go with. But I would imagine this TV is still on the new side. If this is the case, the values on the starting resistors for the inverter board have changed values. You will need an inverter board replaced. Or if you know of an authorized Philips Center, they may replace the resistors with the same value or new values, depending on the model number of your TV. Thanks for asking and show a few hands of support!
There is a install kit 483531057673 for this model when the set is dead. The kit will contain 7404 and the Horizontal Driver Transformer 5402 along with resistors that will limit stress on 7404 and includes complete instructions
If it's that new call the place that it was purchased and see about manufacturer warranty... It should have a one-year parts and even that will help...
The problem you're describing is likely the center led or prisim. The unit thinks there is a tape in the tape path and attempting to load it. Not an expensive repair but highly complicated for the average person...
You can try these codes 2211 or 3308 if they do not work you will need to reset the unit. You will need to unplug it for 45 minutes that will reset the TV to factory settings. Then the pass codes I provided should work.