Question about Canon NP 6050 Copier

2 Answers

Np 6050 copier

The printer is displaying EOO1 how do I fix this and where can I find the service mode?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I don't read or speak Italian. The problem could be a couple of things, 1) the Fuser rollers need to be replaced worn out. On the roller or near the roller usually top roller (hard) there is a sensor it could be dirty (usually not). 2) The heating element inside the roller is out (halogen lamp) (usually this). You will want to call a tech for this one. Time consuming. Good luck

Posted on Jul 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

Np 6050 copier - 542986c.jpg

This is from NP6060 I think is the same with NP6050
I have only in italian
maybe you have to chek:
E001 Fuser problem / high temperature / triac / AC driver / pinched wire

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code erorr photo copy canon np 6050


What is the error code the copier is displaying on the control panel???

Nov 08, 2011 | Canon NP 6050 Copier

1 Answer

NP 6050 Copier: connect with computer...


Sorry the Canon NP 6050 cannot be connected to your computer. this type of copier is an Analog copier. if you wish to have a copier that can be connected to computer you need a Digital Copier with printer and scanner option.

May 17, 2010 | Canon NP 6050 Copier

1 Answer

I have an error in my machine canon np 6050 error


"E004" Abnormal fuser temp. (fixing heater, dc controller, ac driver)
http://rapidshare.com/files/161024133/NP6050sm.rar
That link above is for a service manual. Copy/Paste that address to address bar..

Apr 23, 2010 | Canon NP 6050 Copier

1 Answer

Can not get into service mode


You have to use a paper clip to push the service switch "SW1" and get a dollar sign on the display sceen. There is a small hole in the inside panel of the front door. It is right above the fuser unit and it is near the meter..... Good Luck

Mar 12, 2010 | Canon NP 6050 Copier

1 Answer

How to canon 6050 Touch Board Defult Setting ?


you need to initialize the machine,you need to enter service mode, to get in the service mode you neeed to press service mode the service mode is the small hole in the lower portion of the control panel the color of cover were it attach is grey after press the service mode there is a $ sign appear on the upper left side of lcd display,then press * 4 * then find ram init. to find that press arrow right on the lcd display after you find ram init. press * the machine auto matically off & on

Jan 06, 2010 | Canon NP 6050 Copier

1 Answer

Driver and Manual request...Pretty Please!


The Canon NP 6050 is an analog copier, will not connect to computer for printing. I can come up with a User Guide for it, if desired, but not the service manual.
As far as the Canon Digital Colour Laser Printer.....what model is it? What operating system are you using?

Jun 12, 2009 | Canon NP 6050 Copier

1 Answer

Once the np 6050 is turned on it displays error code E010 switch off and on again


E010 error code is a main motor lock .
Check for jammed paper in the Fixing unit.
Pull transport/Fixing Unit tray out and rotate large knob on left side to check Fixing unit for obstruction/turnability. Other than this, it could be main motor failure.....

Jun 08, 2009 | Canon NP 6050 Copier

2 Answers

NP 6050 Languge


how to fixed canon np 6050 copier because i dont have manual book

May 03, 2008 | Canon NP 6050 Copier

1 Answer

Np4050


*6*
screen 6-5
WSTNR highlight and press C button
value should return to 00000000
if you dont know how to get into service mode
call me 00447764303923

Feb 15, 2008 | Canon NP 6050 Copier

1 Answer

An error in NP 6050


E030 Does pertain to the total copy counter.If you have changed the dc controller & copy counter & still get the E030 error, you may have to enter the service mode to release the error. In service mode under *4* (function) advance to the error screen & press the star button. If you do not know how to get into service mode you can email me at bspier@carlsonsupplies.com or call Bill @ 315-701-1279 Please put canon 6050 E030 in subject line in case my email dumps it into the junk folder.

Aug 13, 2007 | Canon NP 6050 Copier

Not finding what you are looking for?
Canon NP 6050 Copier Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...