Question about LG RC797T

1 Answer

POWER SUPPLY PROBLEM

WHEN I PUSH THE POWER BUTTON IT DOES NOT POWER UP AND THE FAN COMES ON BUT NOT CONSTANT,IT SEEMS TO STOP AND START DO YOU HAVE ANY IDEA WHAT THE PROBLEM MIGHT BE.

Posted by on

  • akharazi1 May 11, 2010

    I can not find mike Adams solution regarding power supply problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 19 Answers

AfroIce. If your combo recorder's an RC797T or RC897T there's an excellent chance (90%) you can completely restore your unit back to fully-operational condition. Please read my repair-brief entitled Interface error! Turn off the power which explains everything you need to know. The repair doesn't require any special electronics knowledge, takes under 20 minutes and costs only a few dollars for the 3 replacement capacitors readily available from your local Radio Shack. Considering your unit's virtually dead you have nothing to loose and everything to gain. Give it your best shot! mikeadams110@yahoo.com

Posted on Nov 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba RD99DTKB2 - switches off within seconds of power on


check for a power supply failure, could be a defective component like regulator and transistor. you could also look at the main board if their is a burnt parts which circuit doesn't circulates.

Aug 13, 2012 | Televison & Video

Tip

Region free code for Daewoo DVG-6000D


Code 1:

Put a region 1, 2, 3, or 4 and so on into the player when it comes up with "wrong region". Just push the "title PBC" button on the remote and away you go.

Code 2:

Push on the remote, STOP, STOP, SETUP, >>, |<<, >>|, SELECT REGION.

Code 3:

With the player turned on and no CD, push (on the remote) "set-up, <<, >>, |<<, >>|".

Code 4:

Put in any DVD, when "WRONG REGION" appears, press the 'TITLE' button on remote or player.

Code 5:

1. Press the Open button on your remote control to open the disc tray.
2. Press the Setup button on your remote control.
3. Press the Stop button on your remote control.
4. Press the Previous button on your remote control.
5. Press the Next button on your remote control.
6. A hidden menu will appear where you can select 1 for region 1, 2 for region 2, and so on.

on Mar 07, 2010 | Televison & Video

1 Answer

I have a LG DVD 276. When I play a CD it always starts were I stopped last time. How do I get it to start ast the begining?


push the stop button then remove the cd, power off the player and then power it on again then press the eject button and insert the cd it will now start to the main selection.you can now select the play that what you need to select.

Oct 29, 2011 | LG DV276 Recorder

2 Answers

Loading stays forever


First you do is to unplug the cord of your DVD unit for 5 hours in order to drain the stored current,the purpose is to reset the unit. After the 5 hours plug the DVD see to it if it open If not,just try to press down on the stop button and pressing eject button at same time and it will unlock the tray .Then the other option is to open the cover of the DVD unit and unplug the unit again to avoid electric shock . When open already look for the disc platter moved it outward while driving the gear or simply push out. The drawer or door of the DVD player and you will see a small circular disc which is often called turntable or disc platter.When the disc platter is out push it back and push it out you do this three times so the slider mechanism align it properly.If you do already what i said then plug it again and if works already closed the cover. The slider mechanism, depending on the age of the unit and the manufacturer, consists of the small chrome rail, a drive motor, a small gear assembly, and (in some units) a small belt that drives the slider unit via the motor. This small belt causes all sorts of problems. If the belt is broken or slipping, it can cause skipping, dropouts, or simply no start up at all. Also, if the belt breaks in the middle of the disc, the drive mechanism gets hair or dirt wrapped up into the gears, or the pick-up assembly doesn?t return to the start position (called home), the unit will (99% of the time) refuse to release the disc, causing it to become stuck inside the unit. There?s a little micro or leaf type switch located at home position that sometimes gets dirty or breaks and, causing this problem also. Hope it may help you;
Regards;
VOTIT


DONT FORGET TO RATE;

Jul 07, 2009 | JVC DR-DX5 DVD/HDD Recorder

1 Answer

Staying on standby


Check P611 in power supply. Its a 1.5a 60v pico fuse (yellowish in color). Also disconnect
plugs when in order not to get false reading when checking other components

Mar 29, 2008 | Sony DVP-CX850D DVD Player

2 Answers

Cyberhome dvd ch-300 dvd player


Not sure, but I believe the 2.75 volts you have should be 5.0 volts.
May want to check capacitors on power supply.
The output connector on the supply may also be labeled with
the correct volatges for reference. COnstant orange light may be
indicating the +5v is low.

Feb 20, 2008 | Cyberhome CH-DVD 300 DVD Player

1 Answer

50 inch insignia plasma


THIS BRAND OF TV IS NOT REALLY RELIABLE AS IT IS ECONOMICAL YOU SEEM TO HAVE A POWER SUPPLY PROBLEM MOST LIKELY A POWER CONTROL BOARD ISSUE .

IT WILL BE MORE ECONOMICAL TO PURCHASE A BETTER BRAND NAME TV AS THE INSIGNIA BRAND PRODUCT IS ECONOMICAL PARTS ARENT AVAILABLE.

Feb 01, 2008 | Insignia IS-DVD1001 DVD Recorder/VCR

2 Answers

Won't Turn on anymore.


The high pitched squeal you refer to comes from a faulty component called a capacitor ... these store power in a circuit to compensate for AC or alternating current, thus allowing an appliance to operate continuously.

The component itself is relatively inexpensive, and would take around 20-40 minutes to isolate and replace, hence it would be relatively cheap to fix.

Having a repairman take a look and explaining the noise as above, would help narrow down the complaint.

The display is faint because of the lack of constant power getting to the display.

Jan 12, 2008 | Cyberhome DVR 1600 DVD Recorder

1 Answer

Philips 642 problem


when mine has frozen up i push and hold the power/standby button for ten seconds then release then push it again and it comes on and opens as usual.  or do you mean the disc is stuck in the machine after the door opens?  maybe open the machine it could be inside.

Dec 23, 2007 | Philips DVP642 DVD Player

Not finding what you are looking for?
LG RC797T Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...